Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Vices 877

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Parallel vice

Design: Die-forged, jaws and anvil inductive-hardened (52-58 HRC), anvil surface suitable for straightening and compressing work. Front-opening, precise clamping due to adjustable bearing, which is protected from dirt by a wiper. With holder for swivelling and interchangeable pipe clamping jaws. Note: For swing clamps and replacement pipe rams see (Order No. 5028 and 5029). 5015

5010

With welded pipe-clamping jaws.

5010

5015

5015

Jaw width

Order No.

Jaw span/ depth

Clamping range pipes external ∅ inch 5015 5010

Hole distance/-∅

Anvil surface

mm

mm

mm

mm

0115 0125 0135 0150

115 122.50 132.00 125 134.50 144.00 135 163.50 174.50 150 183.00 195.50

140/ 70 – 3/8–1.1/2 102/13.5 46 x 60 160/ 75 – 3/8–1.1/2 113/13.5 50 x 70 170/ 85 – 3/8–1.1/2 120/16.0 57 x 75 190/100 – 3/8–2.1/2 137/16.0 68 x 84

(W500)

(W500)

5010

Turntable

Design: Steel-forged, freely adjustable with lock screw. Application: To rotate the vice by 360°.

5006

For jaw width mm

Order No. 0125 0135 0150

125 135 150

41.50 42.80 46.80 (W500)

5006

Spare jaw for parallel vice

Design: Suitable for parallel vices (Order No. 5013 and 5015).

5028

Hand Tools 5

Swivel-mounted pipe clamping jaw (only one required), forged and hardened, for secure and firm clamping (3-point clamping) of pipes.

5029

Plastic protective jaw (2 units required) for the gentle clamping of delicate items.

5028

5029

5028

For jaw width mm

Order No. 0120 0140 0160 0180

120 140 160 180

29.30 36.00 40.00 43.90 (W500)

31.90 34.20 36.50 39.60 (W500)

5029

Precision parallel vice

Design: Heavy, solid design made of high-strength grey cast iron, the best clamping precision due to the long and precise dovetail guide. Concealed, dirt-proof and smooth-running acme thread spindle, interchangeable and reversible hardened steel jaws, integrated pipe clamping jaws, opens to rear and with large anvil surface for simple straightening work. Application: Suitable for multiple uses due to its solid construction and especially precise guiding/clamping.

5004

Jaw width mm

Order No. 0100 0125 0150

Jaw span mm

Clamping depth mm

5004

100 125 150

204.00 237.00 368.00 (W501)

140 180 280

84 88 98

Height adjuster, automatic

Design: The automatic gas-pressured spring adjustment up to max. 215 mm gives smooth vertical adjustment and 360° rotation. Supplied without fixing screws.

5005

Jaw width mm

Order No. 0100 0125 0150

100 125 150

223.00 223.00 223.00 (W501)

5005

5/3

Articles marked ◊ are not held in stock, procurement is effected at short notice.