Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Crimping pliers 939

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Crimping pliers PZ for end sleeves

Design: Pliers made of steel, with locking mechanism for correct, complete crimping. Quick-release in case of incorrect operation. Handles with multi-component plastic coating. Application: For the pressing of ferrules DIN 46228 (Parts 1 + 4), with and without plastic protective cover.

5506 5515 5521 5527

Trapezoid pressing. Processing from side.

Trapezoid pressing. Processing from side.

Square pressing. Processing from front.

Trapezoid pressing. Due to rotating die, it is possible to introduce the ferrules both from the side and the front. Trapezoid pressing. Due to rotating die, it is possible to introduce the ferrules both from the side and the front. Locking knob fixes the crimp insert.

5517

5514 m 5516

Hexagonal pressing. Processing from side.

Square pressing. Processing from side.

5506

m

5515

5521

5527

5517 Locking knob fixes the crimp insert.

5514

5516

Hand Tools 5

5506

5515

5521

5527

5517

5514

5516

Conductor cross-section mm 2

Order No.

Crimping zones

Length

mm 200 200 200 200 200

PZ 4

PZ 16

PZ 3

PZ 6 roto

PZ 6 roto L

PZ 10 HEX

PZ 10 SQR

0005 0005 0005 0005 0005

0.5 – 4 6.0 –16 0.5 – 6 0.14–10 0.14– 6

154.00

–

– –

– – – –

– – – –

– – –

– – –

1 3 1 1 1

– – – –

161.50

– – –

172.00

– –

196.00 196.00

163.00 165.50

–

–

(W523)

(W523)

(W523)

(W523)

(W523)

(W523)

(W523)

PreciForce ® crimping pliers for end sleeves

Design: Made of special grade, chromium-vanadium electric steel, hardened and tempered in oil. Burnished head. For optimum crimping results due to the precision profiles and unlockable locking mechanism; precise factory-set crimping pressure. Leverage-transmission handles with multi-component plastic covers. With 5 crimping zones. Application: For the pressing (trapezoid pressing) of ferrules in line with DIN 46228 (Parts 1 + 4), with and without plastic protective cover.

5508

Conductor cross-section mm 2

Order No. 0005

Processing

Length mm

0.25–6

92.60 (W525)

from the side

220

Crimping pliers for end sleeves

Design: Made of special grade, chromium-vanadium electric steel, hardened and tempered in oil. Burnished head. For optimum crimping results due to the precision profiles and unlockable locking mechanism; precise factory-set crimping pressure, reduces force by hand by up to 30% due to optimum lever transmission. Two-hand operation for easy crimping of large circuit cross sections. Handles with plastic covers. Application: For the pressing (trapezoid pressing) of ferrules in line with DIN 46228 (Parts 1 + 4), with and without plastic protective cover.

5509

Conductor cross-section mm 2

Order No. 0005 0010 0015

Processing

Crimping zones

Length mm

0.25–6

107.00 107.00 136.50 (W525)

from the side from the side from the side

5 3 2

250 250 250

10 + 16 + 25

35 + 50

5/65

Articles marked ◊ are not held in stock, procurement is effected at short notice.