Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

First page Table of contents Previous page 955 Next page Last page

Test and measuring devices 955

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Digital current clamp multimeter

Design: Housing made of impact-resistant, unbreakable plastic, with automatic shutdown function. Application: For the safe current measurement at insulated cables, without having to remove or damage the insulation. CM 1-1 Supplied with compact protective bag and battery.

IP 30

5585 0101 5585 0102 5585 0200 5585 0501 5585 0700 5585 0900

CM 1-2 Supplied with compact protective case, dual-insulated safety measurement lines and batteries.

CM 2 Precise due to true RMS measurement procedure TRUE RMS. Tested and approved according to IEC/EN 61010-1 (DIN VDE 0411-1). Ideal for measuring small currents. Supplied with compact protective bag, double insulated safety measurement cables and batteries.

CM 5-1 Automatic selection of correct measuring function, incorrect measurements as a result of choosing the wrong measuring range prevented, quick reaction times due to 5 samples per second. The voltage measurement takes place with low input impedance (LoZ) for the suppression of capacitive/inductive interspersed voltages. For continuity and diode testing. Supplied with compact protective bag, double insulated safety measurement cables and battery. CM 7 Ideal for current measurement up to 1000 A (alternate and direct current). Supplied with compact protective bag, double insulated safety measurement cables and battery. CM 9 (stray current pliers) Precise due to true RMS measurement procedure TRUE RMS. Resolution of 1 µA in the 6 A measuring range For locating current leakages and measuring leakage and residual currents in electrical installations (VDE 0100) and devices (VDE 0701/0702, DGUV Rule 3, Industrial Safety Ordinance). Measurement during normal operation of the plant/unit, ideal for preventive maintenance and troubleshooting, reliable and easy to locate insulation faults. Connectible low-pass filter (50–60 Hz). Supplied with compact protective bag and batteries. CM 11 Ideal for fault detection in electrical systems, controls, devices and MV electrics. Precise measuring of small direct/alternate currents with resolution of 0.1 mA. True real measuring value process TRUE RMS, measuring of standby, stray, difference, leakage and load currents. Supplied with compact protective bag, double insulated safety measurement cables and battery.

5585 1100 m

Hand Tools 5

5585 0101

5585 0102

5585 0200

5585 0700

5585 0900

5585 1100

5585 0501

CAT III 600 V

CAT III 300 V

CAT IV 600 V

CAT III 300 V

CAT IV 300 V

0101

0102

0200 CM 2

0501

0700 CM 7

0900 CM 9

1100

Order No.

Model

CM 1-1

CM 1-2

CM 5-1 257.00

CM 11 329.00

5585 DC voltage AC voltage

62.00

82.80

177.50

276.00

408.50

– – –

0.1 V–600 V 0.1 mV–600 V 0.7 V–1000 V 0.1 V–1000 V 0.1 V–600 V 1 mV–600 V 1.3 V–750 V 0.1 V–750 V

– – –

0.1 V–600 V 0.01 V–600 V 0.1 mA–10 A

Direct current

–

10 mA–300 A 0.9 A–600 A 0.1 A–1000 A

Alternating current

10 mA–400 A 0.1 A–400 A 100 mA–300 A 0.9 A–600 A 0.1 A–1000 A 1 µA–100 A 0.1 mA–20 A

Resistance

–

0.1 Ohm– 20 MOhm

0.1 Ohm– 40 MOhm

1 Ohm– 10 kOhm

0.1 Ohm– 400 Ohm

–

0.1 Ohm– 600 kOhm

Continuity Frequency

– –

yes

– –

yes

–

1 Hz–400 Hz

–

Measurement value memory

HOLD, MAX

HOLD

HOLD, MAX HOLD, ZERO HOLD, MAX/MIN, PEAK, ZERO

HOLD, PEAK

HOLD, MAX/MIN, ZERO

Measuring procedure

RMS

TRUE RMS TRUE RMS TRUE RMS TRUE RMS TRUE RMS

Pliers opening

30 mm

25 mm

35 mm

53 mm

40 mm

23 mm

Measurement category

CAT III 600 V CAT III 600 V CAT III 300 V CAT IV 600 V CAT IV 600 V CAT III 300 V CAT IV 300 V

Protection type

IP 30

Batteries

1 x 6LR61 block battery

2 x micro AAA/LR03

1 x 6LR61 block battery

2 x micro AAA/LR03

Display

LCD

(W514)

5/81

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Made with FlippingBook Online document