html-Catalog FORMAT plus - EDE 2015 - 2017

Drilling tools 116

Spot weld drill cyl. Shank

Design: HSS, Co5. Easy centring, drilling and precisely round drilling is guaranteed by the special point geometry with 90° centre tip. Application: Suitable for clean and burr-free drilling of welding spots in short to long chipping materials.

HSS Co5

1 Cutting Tools

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1325

C

C

V

V

U

1325

1325

∅ mm

∅ mm

Order No. 0600

Spiral length mm

Total length mm

Order No. 0800

Spiral length mm

Total length mm

6

5.05 (124)

28

66

8

6.55 (124)

37

79

Spot weld miller hexagon shank

Design: HSS. With double-sided cutting, replaceable and rotating milling bit as well as setting screw for precisely setting the milling depth. The hexagonal shank causes a 100 % power transfer, thus in every bushing the countersink is extremely slip-free. Scope of supply: spot weld milling cutter with milling bit and centring pin. Application: For detaching spot welded sheet parts without misshaping the sheet or pulling it out.

HSS

1321

Design

Order No. 0050 0100 0150

Milling cutter ∅ mm

Total length mm

Compl. spot weld cutter

11.30

10 10

72

Spare milling bit Spare centring pin

5.00 0.64

– –

–

(124)

Core drills

Design: HSS-Co, AlTiN coated surface, with Weldon shank ∅ 19 mm, 2 carrier surfaces and 1 countersink for Rota-Quick ® . Inner hole 6.35 mm.

HSS Co

1326

Application: For use in magnetic base drills and column drills with MK mount. The core drill only machines a thin material ring. The remaining drill core is ejected by a guide and ejector pin using spring force. The chips are quickly moved up for disposal and the risk of breakage minimised. Even large drilling diameters require relatively low amounts of energy. The core drill machines only a small part of the overall area in comparison to the spiral drill. This results in huge savings in power and time.

AlTiN

1327

1326

1327

1 Roughing tap 2 Finish tap

50 mm cutting depth

30 mm cutting depth

AlTiN

AlTiN

AlTiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1326 1327

30 28

8 6

15 13

20 18

12 10

6 4

22 20

40 38

42 40

1326

1327

1326

1327

Drill ∅

Drill ∅

Order No.

Order No.

mm

mm

AlTiN

AlTiN

AlTiN

AlTiN

0121 0131 0141 0151 0161 0171 0181 0191 0201 0211 0221 0231 0241 0251 0261 0271 0281 0291 0301 0311

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

23.70 24.00 24.20 25.90 27.70 29.30 31.10 32.80 34.50 36.30 34.40 36.00 37.50 39.10 40.60 42.20 43.70 45.30 46.80 48.40

32.00 33.40 34.50 37.00 39.50 41.90 44.40 46.80 49.30 51.80 54.20 56.70 59.20 61.60 64.10 66.60 69.00 71.50 73.90 76.40

0321 0331 0341 0351 0361 0371 0381 0391 0401 0411 0421 0431 0441 0451 0461 0471 0481 0491 0501

32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

55.20 57.00 62.80 69.00 70.90 73.00 74.90 76.90 78.80 80.80 82.90 84.80 86.80 88.70 90.70 92.60 94.70 96.60 98.60

78.90 81.30 83.80 86.30 92.20 94.90 97.40 99.90

102.50 105.00 107.50 110.00 112.50 113.00 118.00 120.50 123.00 125.50 128.00

(125)

(125)

(125)

(125)

1/96

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).