html-Catalog FORMAT plus - EDE 2015 - 2017

1211

Puller

Recessed puller

Design: With two-piece jaws and splay. Application: For extracting ball bearings, bearing outer rings and bushings. Also located very close to the back wall, the bearing is grasped by the excellent tension effect and extracted quickly. For use with counter support for recessed extractor (Order No. 6923).

6922

Model

Order No. 0012 0014 0016 0019 0023 0030 0040 0046 0058 0070 0100

For drilling mm 8– 12 10– 14 12– 16 14– 19 18– 23 20– 30 28– 40 36– 46 45– 58 56– 70 70–100

For counter sup- port model No.

Length mm

21-01 21-02

38.20 38.20 38.20 38.20 38.20 42.00 47.30 52.60 70.80 89.30

22-1 22-1 22-1 22-1

73 73 72 72 89 92 101 113 135 133 166

21-1 21-2 21-3 21-4 21-5 21-6 21-7 21-8 21-9

22-1; 22-2 22-1; 22-2 22-1; 22-2 22-2; 22-3 22-2; 22-3 22-2; 22-3 22-2; 22-3

6922

141.50

(562)

Slide hammer device

Design: Space-saving, stable model, with ergonomic shaped handles. Application: For use with an recessed extractor (Order No. 6922). For quick removal of ball bearings. After setting the recessed extractor slide hammer bar screw with a wedge spindle and slide hammer.

6924

Model

Order No. 0000 0004

For recessed puller model

Weight kg

Length mm

22-0

40.30 88.30

21-0 to 21-2 21-3 to 21-8

0.5 1.7

150 230

6924 0000

6924 0004

22-0-1

(562)

Slide hammer set

Design: Supplied in plastic case or in i-Boxx, with foam insert.

6925

Design

Order No. 0000

Model Set contents

For recessed puller model 21-0 to 21-8

10-piece in plastic case

90.50

KS-22-01 1 slide hammer

6 threaded adapters M3; M4; M5; M6; M8; M10 3 galvanised adapters M10; M12; 15-16G 10 threaded adapters M3; M4; M5; M6; M8; M10; M12; M14; M16; M18 5 recessed extractor 21-00; 21-01 (Order No. 6922 0012);

6 Hand Tools

6925 0000

0005

18-piece in i-Boxx

270.50 m

28-A 1 slide hammer

21-00 to 21-2

21-02 (Order No. 6922 0014); 21-1 (Order No. 6922 0016); 21-2 (Order No. 6922 0019) 2 galvanised adapters M10; M12

(562)

Counter part for recessed puller

6925 0005

Design: Stable support brace with T handle and one-piece extractor hooks. Supply of 22-1 and 22-2 with screwed in reducer and 22-3 with coupling nut in this screwed in reducer. 22-1 For recessed extractors 21-0 and 21-02, with reducer For recessed extractors 21-1 and 21-5, without reducer.

For recessed extractors 21-3 and 21-5, with reducer. For recessed extractors 21-6 and 21-8, without reducer.

22-2

For recessed extractors 21-6 and 21-8, with reducer via connecting nut. For recessed extractor 21-9, without reducer via connecting nut.

22-3

Application: For use with an recessed extractor (Order No. 6922). For connecting to the recessed extractor, the spindle of the support brace is screwed into the clamping nut of the recessed extractor.

6923

Model

Order No. 0001 0002 0003

For recessed puller model

22-1 22-2 22-3

42.50 55.00

21-0 – 21-5 21-3 – 21-8 21-6 – 21-9

116.50

(562)

6/199

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.