html-Catalog FORMAT plus - EDE 2015 - 2017

Circle cutter and accessories 122

Design: HSS, DIN 335-C. 90° countersink angle. Radial taper-ground, bright surface, with straight clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. The hexagonal shank (1/4" bit shank according to DIN 2126) causes a 100 % power transfer, thus in every bushing the countersink is extremely slip-free. Application: Suitable for universal chatter and burr-free drilling, counter- sinking, milling and deburring work. The countersink bit can also be used as a hand deburrer together with the corresponding activation tools such as grips, toggles or ratchets with a 1/4" hexagon mount. Note: Sufficient supply of coolant is essential. Countersink bit 90° with 1/4" hexagonal shank

Z 3

HSS DIN

335-C

90°

1 Cutting Tools

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1420

C

V

C

1420

Nominal ∅

Order No.

Smallest ∅

Total length mm

For countersink screws

mm 6.3 8.3 10.4 12.4 16.5 20.5

mm 1.5 2.0 2.5 2.8 3.2 3.5

0630 0830 1040 1240 1650 2050

4.79 5.65 6.50 7.75 9.80

31 31 34 35 40 41

M3 M4 M5 M6 M8

11.55

M10

(134)

Design: Supplied in a robust, high quality plastic cassette with auto- matic countersink setup function when opened incl. universal holder, handle with 1/4" internal hexagon mount and drilling paste. Countersink bit set 90° with hexagonal shank

1422

Nominal ∅ mm

Order No. 0005

Design

6.3–20.5

69.10

9-piece

(134)

Spiral drill bit is found on Ç 1/8.

1/102

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).