html-Catalog FORMAT plus - EDE 2015 - 2017
Hand wire brushes/honing brushes 1227
Copper tube brush
Design: Double wire core with crimped steel wire and stable plastic handle. Application: To quickly clean the inside of pipes and soldering joints.
7013
Brush ∅ mm
Order No. 0013 0016 0019 0023 0029
Trim length mm
Total length mm
13 16 19 23 29
5.80 5.95 6.25 6.60 6.90 (566)
25 25 28 25 32
160 160 160 160 160
Tube brush
Design: Double wire core with crimped steel wire and wooden handle.
Application: To remove chippings and loose wparticles from pipes as well as for cleaning the inside of holes in steel, wood and plastic.
7014
Brush ∅ mm
Order No. 0015 0020 0025
Trim length mm
Total length mm
15 20 25
7.25 7.35 7.60 (566)
100 100 100
280 280 280
Tube brush
Design: Double wire core and loop. Trim 100 mm, overall length 300 mm. Application: Ideal for cleaning, dust removal, deburring, paint removal in nozzles, glass bottles, tubes, pipes, etc.
7017
7017 7019 7021
Steel wire, crimped.
Brass wire, crimped.
7019
Nylon, smooth.
7021
7019
7021
7019
7021
7017
7017
Brush ∅ mm
Brush ∅ mm
Order No. 0005 0010 0015 0020 0025
Order No. 0030 0035 0040 0045 0050
4 5 6 8
5.85 5.90 6.05 4.42 4.49 (566)
– –
1.90 1.95 2.02 2.12 2.12 (566)
12 15 18 20 25
4.53 4.62 4.75 4.82 4.86 (566)
5.70 5.85 6.05 6.10 6.20 (566)
2.14 2.19 2.28 2.30 2.35 (566)
6.05 6.05 5.70 (566)
10
Honing brush
Design: Robust, self-centring honing tool with silicon carbide fill for a gentle grinding process. The abrasive spheres adapt to the surface with the flexible brush construction. Overall length 200 mm. Application: For final finishing of surfaces and bores. Can also be used for edge breaks and processing of unrounded holes.
For the generation of fine-ground surfaces with a high contact ratio for any potential oil-film adhesion. Easy handling on hand drills, honing machines and automatic machines.
7 Hand Tools
7035 7037
Git 120.
Git 180.
7037
7037
7035
7035
Brush ∅ mm
Brush ∅ mm
Order No.
Tool ∅ mm 9.0 10.0 11.0 12.0 13.0 15.5 18.0 20.0 22.0 25.0 27.0 28.0
Order No.
Tool ∅ mm 30.0 32.0 35.0 38.0 41.0 45.0 48.0 51.0 54.0 57.0 60.0 64.0
Effective working width mm
Shaft ∅ mm
Effective working width mm
Shaft ∅ mm
0008 0009 0010 0011 0012 0014 0016 0018 0020 0022 0024 0025
8 9
18.95 18.95 19.60 19.60 20.00 20.00 20.20 20.20 20.90 20.90 21.30 21.30 22.50 22.50 22.70 22.70 22.90 22.90 24.00 24.00 25.10 25.10 25.60 25.60
50 50 60 60 60 60 60 60 70 70 70 70
3.7 3.7 3.7 3.7 3.7 3.7 4.6 4.6 4.6 4.6 5.1 5.1
0027 0029 0032 0035 0038 0041 0045 0048 0051 0054 0057 0060
27 29 32 35 38 41 45 48 51 54 57 60
26.50 26.50 27.20 27.20 28.70 28.70 30.20 30.20 31.40 31.40 32.90 32.90 34.20 34.20 35.70 35.70 36.90 36.90 37.10 37.10 37.80 37.80 38.20 38.20
70 70 70 70 70 70 70 70 70 70 70 70
5.1 5.1 5.1 5.7 5.7 5.7 5.7 6.5 6.5 6.5 7.3 7.3
10 11 12 14 16 18 20 22 24 25
(702)
(702)
(702)
(702)
7/3
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook