html-Catalog FORMAT plus - EDE 2015 - 2017

1241

Punching tools / arch punches

Screw hole punch

Design: Made of special tool steel. Activated via spanner or hydraulic tools. Suppliedincl. die, stamp, pressure screw. Application: For punching holes in various materials such as stainless steel, copper, brass, aluminium and sheet iron. Particularly suitable for working in hard-to-reach areas, such as switching cabinets, instruments panels, etc. Note: Lubricate pressure screw and die before working. The predrilled hole must be ca. 1 mm larger than the pressure screw.

7116 7117

Without ball bearings.

7116

7117

With ball bearings.

7117

7116

Punch diameter mm

Order No. 0012 0015 0016 0018 0020 0021 0022 0023 0025 0028 0029 0030 0032 0035 0037 0038 0040 0047 0051 0054 0060

Punch diameter PG mm

Screw size mm

Sheet thickness max. mm

12.7 15.2 16.0 18.6 20.0 20.4 22.0 22.5 25.0 28.0 28.3 30.0 32.0 35.0 37.0 38.0 40.0 47.0 51.0 54.0 60.0

14.95 14.95 14.95 16.90 16.90 16.90 18.85 18.85 21.40 21.40 22.50 22.50 22.50 26.00 29.20 29.20 39.20 43.80 51.80 56.60 65.70

27.40 27.40 27.40 27.70 27.70 27.70 27.70 27.70 29.60 29.60 31.00 31.00 31.00 34.30 37.80 37.80 45.80 52.40 52.40 61.50 74.50

7.0 9.0

M6 x 30 M8 x 1 x 35 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M12 x 1.5 x 70 M12 x 1.5 x 70 M16 x 1.5 x 80 M16 x 1.5 x 80 M16 x 1.5 x 80

1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0

–

11.0

–

13.5

–

16.0

– –

21.0

– – –

29.0

– –

36.0

–

42.0 48.0

(570)

(570)

Spare screw for hole punch

7118

7118

Screw size mm

Screw size mm

Order No. 0006 0008 0010

Order No. 0011 0012 0016

M6 x 30 M8 x 1 x 35 M10 x 1 x 45

2.59 2.59 2.59 (570)

M10 x 1 x 55 M12 x 1.5 x 70 M16 x 1.5 x 80

2.85 4.27 5.95 (570)

7 Hand Tools

Wad punches

Design: DIN 7200 A, made of special tool steel, drop-forged, with finely polished tip and powder-coated shaft. Hardened and tempered cutting edge, slightly conical interior for simple removal of cut-out. Application: For the creation of seals and sealing rings made of cardboard, leather, rubber, etc.

7120

7120

∅ mm

∅ mm

Order No. 0002 0003 0004 0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015

Order No. 0016 0017 0018 0019 0020 0022 0024 0025 0026 0028 0030 0032 0035 0040

2 3 4 5 6 7 8 9

3.38 3.38 3.38 3.38 3.38 3.48 3.48 3.60 4.01 4.44 4.73 5.60 5.75 6.25 (572)

16 17 18 19 20 22 24 25 26 28 30 32 35 40

7.00 7.30 7.75 8.15 9.05

10.30 12.40 13.20 14.20 14.70 16.40 20.00 21.10 29.50 (572)

10 11 12 13 14 15

7/17

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.