html-Catalog FORMAT plus - EDE 2015 - 2017
Pressing tongs/rings/cropping tongs 1259
Note: Driven by all ROLLER radial presses (with the exception of ROLLER Multi-Press Mini ACC) and with suitable drives of other makes. Pressing tongs/clamping ring 7176 Pressing tongs model M For Geberit Mapress carbon steel, stainless steel, copper. (Stainless steel and copper in gas installation 15-35 mm.) 7164 Clamping ring model M For Geberit Mapress carbon steel, stainless steel, copper, stainless steel and copper in gas installation. Adapter tongs Z2 are necessary for driving (Order No. 7168 0003). Clamping ring model M, 45° offset, for working in hard-to-access places For Geberit Mapress carbon steel, stainless steel, copper, stainless steel and copper in gas installation. Adapter tongs Z1 are necessary for driving (Order No. 7168 0001). m Pressing tongs model V For System Viega (Prestabo, Profipress, Profipress G, Profipress THERM, Sanpress, Sanpress INOX, Sanpress INOX G). Pressing ring model V, offset 45°, for working in difficult to reach places For System Viega (Prestabo, Profipress, Profipress G, Profipress THERM, Sanpress, Sanpress INOX, Sanpress INOX G). Adapter tongs Z1 are necessary for driving (Order No. 7168 0001). m 7170 7172 7177
7178
Pressing tongs model UP (U ∅ 40-50 mm) For System Uponor MLC, MLC-D, MLC-G.
7179
Pressing tongs model G For Geberit Mepla.
NEW: Pressing, 45° offset (7170 + 7172) for hard-to-reach places.
7180
Pressing tongs model VP For System Viega (Sanfix Fosta, Sanfix P, Sanfix Plus, Viegatherm P).
7164
7170
7177
7172
7178
7179
7180
7176
Nominal width DN
Order No. 0012 0014 0015 0016 0018 0020 0022 0025 0026 0028 0032 0035 0040 0042 0042 0050 0054 0054
12 14 15 16 18 20 22 25 26 28 32 35 40 42
on request
– – – – – – – – – – – – –
on request on request on request
– – –
– – –
–
–
–
–
–
on request
on request
on request on request on request
–
–
–
–
–
on request on request on request
on request
on request on request on request on request
–
–
–
–
–
–
on request on request on request
on request
on request on request on request
–
– –
–
– –
– –
– –
– –
on request
on request
– –
on request
– –
on request
on request on request on request
–
–
–
–
–
on request on request on request
–
– – – – – – –
on request
on request on request on request
–
– –
– – – – – –
– –
– – – – – –
on request on request
on request
– –
– –
42 (4G)
on request
– –
on request
50 54
– –
– –
on request on request
on request
– –
– –
54 (4G)
on request
–
on request
7 Hand Tools
Application: For driving pressing rings. Adapter tongs
7168
Model
Order No. 0001 0003
Z1 Z2
on request on request
Cropping tongs M
Application: For the vibration-free cutting of threaded rods made of steel, stainless steel up to strength grade 4.8 (400 N/mm 2 ). Note: Driven by all ROLLER'S radial presses (with the exception of ROLLER'S Multi-Press Mini ACC) and with suitable drives of other makes.
7185
Design
Order No. 0008 0010
M8
on request on request
M10
7/35
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook