html-Catalog FORMAT plus - EDE 2015 - 2017

Saws 1270

Design: With triple sharpened teeth for push and pull stroke. Ergonomically shaped 2-component handle with finger guard for optimum transmission of strength, stability and comfort. Marking aid for 45° and 90° angles. Hand saw with 2-component handle 7255 Coarse universal teeth. 375 mm model with fine teeth for a clean and fast starting cut. For soft woods and boards 7257 Fine universal teeth. For hard woods and boards. Order No. Blade length mm 7255 7257 Teeth/inch Blade thickness mm 3750 375 – 17.90 10 1.0 3750 375 17.90 – 8 1.0 4500 450 19.05 – 8 1.0 5000 500 19.95 – 8 1.0 5500 550 – 21.10 10 1.0 (252) (252)

Hand saw, PTFE-coated

Design: Coarse universal teeth, with triple-sharpened teeth for push and pull work. The special PTFE coating reduces friction, enabling 20–25 % more efficiency (material dependent) and increases the service life of the saw due to the low degree of wear. Screwed, ergonomically shaped 2-component handle with finger guard for optimum transmission of strength, stability and comfort. Marking aid for 45° and 90° angles. 375 mm model with fine teeth for a clean and fast starting cut. Application: For soft and hard woods, as well as boards.

7256

Blade length mm

Order No. 3750 5000

Teeth/inch

Blade thickness mm

375 500

21.60 24.80

8 8

1.0 1.0

(252)

Hand saw, ground-level sawing

Design: Universal sharpened teeth, hardened for 6 to 8 times longer service life. The innovative and unique relation of the handle in terms of height and angle to the optimised tooth geometry increases transmission strength, so that the entire length of the saw blade can be used. Ergo- nomically shaped 2-component handle with finger guard for optimum transmission of strength, stability and comfort. Marking aid for 45° and 90° angles. Application: Universal use for various types of work with different materials. Also allows for clean ground-level sawing.

7256

Blade length mm

Order No. 4900

Teeth/inch

Blade thickness mm

490

17.45

10

0.85

(252)

7 Hand Tools

Keyhole saw

Design: Made of alloyed tool steel, with straight set and sharpened teeth. With double riveted, open hardwood handle. Application: For all types of dry natural wood, such as chipboard, plywood and blockboard.

7258

Blade length mm

Order No. 0300

Teeth/inch

Blade thickness mm

300

7.40 (555)

7

0.6

Keyhole saw

Design: Aggressive teeth, with triple sharpened teeth for push and pull stroke. With sharpened tip for easy penetration and cutting in drywalling. Ergonomically shaped Pro-Touch soft handle for increased comfort. Application: Ideal for processing of plasterboard.

7259

Blade length mm

Order No. 3000

Teeth/inch

Blade thickness mm

300

15.20

8

1.5

(252)

7/46

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).