html-Catalog FORMAT plus - EDE 2015 - 2017
131
Circle cutter and accessories
75° countersinks and deburring countersinks with cylinder Shank
Design: HSS, according to factory standard, form C. 75° countersink angle. Axial and radial taper-ground. With straight, u-shaped clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential.
Z 3
Factory standard
HSS
75°
1 Cutting Tools
1462
blank right
1463 TiN
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Al, AI and Mg alloys
Copper, brass, bronze
Cast iron materials
Order No.
1462 1463
C C
V C
C C
V
V
1462
1463
Nominal ∅ mm
Order No.
Smallest ∅ mm
Total length
Shank ∅ mm
mm
bright
TiN
0630 0830 1040 1240 1650 2050 2500 3100 4000
6.3 8.3 10.4 12.4 16.5 20.5 25.0 31.0 40.0
10.70 11.15 13.25 14.00 17.85 25.80 34.50
13.75 14.35 17.10 18.05 23.10 33.40 44.50
1.6 2.2 2.7 3.2 3.7 4.2 5.2 6.2 8.1
45 50 51 55 61 65 69 73 82
5 6 6 8
10 10 10 12 12
47.50 m 70.00 m
62.50 m 90.10 m
(134)
(134)
m
75° countersinks and deburring countersinks sets with cylinder Shank 1462 Set consisting of (order no. 1462). bright 1463 Set consisting of (order no. 1463). TiN
1462
bright
1463 TiN
1462
1463
Set contents
Order No.
mm
bright
TiN
0010 0005
6.3; 10.4; 16.5; 20.5; 25.0 6.3; 8.3; 10.4; 12.4; 16.5; 20.5
105.50
131.00 120.00
97.00
(134)
(134)
1/111
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
Made with FlippingBook