html-Catalog FORMAT plus - EDE 2015 - 2017

1317

Rough grinding discs

Rough grinding disc for aluminium

SG-ELASTIC Design: Aluminium oxide (A24), soft, with fibre-reinforced resin bond for long life and grinding performance. Standard bore 22.23 mm. Application: For aluminium work. Non-tool clogging even with soft, lubricating substances. Note: Contains no fillers that leave unwanted residue on the tool. So the surface is immediately ready for welding.

Plastic FRP wood

Aluminium

Steel

TC

INOX

Cast

Stone

Paint

Order No.

8056

C

8056

∅ x thickness mm

Order No. 0115 0125 0178

PU

Design

Max. speed RPM min -1

115 x 7.2 125 x 7.2 178 x 7.2

3.55 4.90 5.95 (825)

10 10 10

Offset Offset Offset

13300 12200 8600

Grinding wheel CC-GRIND ®

Design: Resin bonded corundum scattering (A) on rip resistant, strong vulcanised fibre substrate. Tough, flexible grinding with high removal rate, lasts up to 30 % longer and has a temperature up to 30 % lower. Note: Not suitable for peripheral grinding. Avoid using on sharp edges.

8017

SG-ELASTIC CC-GRIND STEEL For the surface processing of steel. Note: Only for use with backing pads (Order No. 8017 1000).

8017

8018

SG-ELASTIC CC-GRIND STEEL For the surface processing of stainless steel. With cooling properties due to grinding-activated additive coating. Note: Only for use with backing pads (Order No. 8018 1000).

8018

Plastic FRP wood

Aluminium

Steel

TC

INOX

Cast

Stone

Paint

Order No.

8017 8018

C

C

8018

8017

∅ mm 115 125

Order No. 0115 0125

PU

Max. speed RPM min -1

3.25 3.49 (840)

3.25 3.49 (840)

25 25

13300 12200

8 Abrasives

Backing pads for CC-GRIND ®

Design: With a patented quick-clamping device for quick and tool-free replacement of the grinding disc, optimised cooling vent geometry for high air flow and M14 thread. Application: For mounting CC-GRIND ® grinding discs on all standard angle grinders at max. 80 m/s peripheral speed.

8017 8018

For mounting CC-GRIND ® STEEL backing pads.

For mounting CC-GRIND ® INOX backing pads.

8018

8017

8018

8017

∅ mm

Order No. 1000

115/125

25.10

25.10

(840)

(840)

8/9

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.