html-Catalog FORMAT plus - EDE 2015 - 2017

First page Table of contents Previous page 1332 Next page Last page

Fibre grinding discs 1332

m

Fibre grinding disc, aluminium oxide, for stainless steel and aluminium work

KF808 Design: Resin-bonded aluminium oxide grain (A) on tear-proof, thick, vulcanised fibre backing material uniform and slightly loose. Excellent grit friction, long life, minimal pressure and good flexibility. An active additive in the coating slows disc-clogging during use on soft metals (aluminium, stainless steel, etc.). In addition, the coating acts as a coolant during grinding. With centre hole (standard bore 22.23 mm) and cross slots. Application: Special product for hard machining, steel alloys and non-ferrous metals with angle and disc grinders as well as abrasive heads on flexible shanks. For all angle grinders with backing pads of max. 80 m/s peripheral speed. Ideal for working with containers, cast parts, body parts etc. Note: Rubber backing pad see (Order no. 8250).

Plastic FRP wood

Aluminium

Steel

TC

INOX

Cast

Stone

Paint

Order No.

8763/8764

C

V

C

V

0036

0050

0060

0080

0100

0120

Order No.

PU

Grit

36

50

60

80

100

120

8763 8764

44.70 57.30

36.90 52.00

36.10 49.30

34.50 46.40

34.50 46.40

34.50 46.40

25 25

∅ 115 mm

∅ 125 mm

(836)

Pricing per 100 pieces

m

Fibre grinding disc, aluminium oxide

Design: Resin-bonded zirconia alumina grain (ZA) on tear-proof, thick, vulcanised fibre backing material, evenly and slightly loose. Excellent grit friction, long life, minimal pressure and good flexibility. Self-sharpening and cooled grinding, thus optimum machining performance. With centre hole (standard bore 22.23 mm) and cross slots. Application: Special product for working with steel alloys and non-ferrous metals with angle and disc grinders as well as abrasive heads on flexible shanks. For all angle grinders with backing pads of max. 80 m/s peripheral speed. Ideal for

working with containers, cast parts, body parts etc. Note: Rubber backing pad see (Order No. 8250).

Plastic FRP wood

Aluminium

Steel

TC

INOX

Cast

Stone

Paint

Order No.

8765/8766

V

C

C

V

0024

0036

0050

0060

0080

0120

Order No.

PU

Grit

24

36

50

60

80

120

8765 8766

72.50 80.50

64.60 71.70

50.90 56.60

43.20 47.80

39.30 43.50

39.30 43.50

25 25

∅ 115 mm

∅ 125 mm

(836)

Pricing per 100 pieces

m

XF850 Design: Full resin-bonded, self-sharpening ceramic grit (CER) with zirconia alumina (ZA) admixture, with cooling properties due to grinding-activated additive coating, on robust and very flexible fabric, scattered evenly and slightly loose. With excellent grit friction, extra-long life, low to medium pressure and very good flexibility. Oil, grease, wax, water and emulsion- resistant. With centre hole (standard bore 22.23 mm) and cross slots. Application: For tough and cooled grinding of high-alloy steel, titanium and nickel-based alloys. Thanks to its extreme hardness it is best suited for working with very hard surfaces. Grinding-activated additives make cool sanding possible, thereby significantly increasing performance. This also ensures extended service life and reduces discolouration of surfaces. Suitable for Fibre grinding disc, ceramic grit with zirconia alumina admixture

8 Abrasives

both dry working and working with cooling agents. Note: For rubber backing discs see (Order No. 8250).

Plastic FRP wood

Aluminium

Steel

TC

INOX

Cast

Stone

Paint

Order No.

8651

C

C

C

C

0036

0040

0060

0080

Order No.

PU

Grit

36

40

60

80

8651

126.00

107.00

84.10

76.50

50

∅ 125 mm

(846)

Pricing per 100 pieces

8/24

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).

Made with