html-Catalog FORMAT plus - EDE 2015 - 2017

191

Thread cutting tools

V-COIL thread repair set

Drilling: Bore out damaged thread with normal spiral drills. Boring out is not required for spark plug threads - the combined drilling and cutting tool should be used. Please note that larger holes are required for thread formers. Check: Check the tap and thread bolt for the same thread and gradient. Thread: Cut the mounting thread in the bored out hole with the special V-COIL taps. The use of cutting oil is recommended. Installing the thread insert: Place the insert on the tool and make sure that the carrier pin is in the slot opening and then make the right setting with the adjustment ring. Then turn in the thread insert in the thread direction applying light pressure. Do not turn against the running direction, as the pin can break off. Breaking the pin: After installation, take the insertion tool out and remove the carrier pin with the pin breaker. The pin should be removed with long nose pliers for larger dimensions and spark plug threads. After completing these steps, a thread is produced that is often better and stronger than the original thread due to the narrow and exact tolerances as well as the spring thread forming. Supplied in a plastic cassette up to M12, and in a metal cassette from M14. Application: Thread armouring of materials with low shearing resistance e.g. aluminium and magnesium alloys, in mechanical engineering, in automobile, electro and medical technology and in aviation and aerospace. Thread repair of damaged or worn threads. Reject recovery

1 Cutting Tools

1651

1651

Core hole ∅ mm

Core hole ∅ mm

Order No.

Set contents

Order No.

Set contents

0100

2,1

22.80

1 tap M2; 1 spiral drill 2.1 mm; 1 hand installation tool with fixing ring no. 2; 1 pin breaker no. 2; 20 thread inserts 1.5 x D 1 tap M2.5; 1 spiral drill 2.6 mm; 1 hand installation tool with fixing ring no. 3; 1 pin breaker no. 3; 20 thread inserts 1.5 x D 1 tap M3; 1 spiral drill 3.2 mm; 1 hand installation tool with fixing ring no. 4; 1 pin breaker no. 4; 20 thread inserts 1.5 x D 1 tap M4; 1 spiral drill 4.2 mm; 1 hand installation tool with fixing ring no. 6; 1 pin breaker no. 6; 20 thread inserts 1.5 x D 1 tap M5; 1 spiral drill 5.2 mm; 1 hand installation tool with fixing ring no. 8; 1 pin breaker no. 8; 20 thread inserts 1.5 x D 1 tap M6; 1 spiral drill 6.3 mm; 1 hand installation tool with fixing ring no. 9; 1 pin breaker no. 9; 20 thread inserts 1.5 x D 1 tap M8; 1 spiral drill 8.3 mm; 1 hand installation tool with fixing ring no. 11; 1 pin breaker no. 11; 20 thread inserts 1.5 x D

0170

8,3

32.60

1 tap MF8 x 1.0; 1 spiral drill 8.3 mm; 1 hand installation tool with fixing ring no. 11; 1 pin breaker no. 11; 20 thread inserts 1.5 x D 1 tap M10 x 1.5; 1 spiral drill 10.4 mm; 1 hand installation tool with fixing ring no. 13; 1 pin breaker no. 13; 15 thread inserts 1.5 x D 1 tap MF10 x 1.0; 1 spiral drill 10.3 mm; 1 hand installation tool with fixing ring no. 13; 1 pin breaker no. 13; 15 thread inserts 1.5 x D 1 tap M12; 1 spiral drill 12.4 mm; 1 hand installation tool with fixing ring no. 15; 1 pin breaker no. 15; 10 thread inserts 1.5 x D 1 tap M14 x 2.0; 1 hand installation tool with fixing ring No. 16; 10 thread inserts 1.5 x D 1 tap MF14 x 1.25; 1 hand installation tool with fixing ring no. 17; 10 thread inserts 1.5 x D 1 tap MF16; 1 hand installation tool with fixing ring no. 18; 10 thread inserts 1.5 x D

0110

2,6

22.80

0180

10,4

34.80

0120

3,2

22.80

0190

10,3

34.80

0130

4,2

22.80

0200

12,4

39.00

0140

5,2

23.70

0210

14,5

43.70

0230

14,5

43.70

0150

6,3

25.60

0220

16,5

52.90

(161)

0160

8,3

32.60

(161)

1/171

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.

Made with