html-Catalog FORMAT plus - EDE 2015 - 2017
241
Tap and die extension
Drilling paste
Design: Lubricant for metalwork. Drilling paste as hinge pin with 30 or 50 g contents. Application: For sheet spiral drill, stepped drill, countersink bits.
1 Cutting Tools
1312
Drilling paste
Order No. 0005 0007
30 g hinge pin 50 g hinge pin
4.26 (124) 5.25 (001)
m
Cutting oil spray
Design: The cutting oil spray provides excellent separation and cooling effect. It increases the surface quality and tool life. Appllication: Especially suitable for drilling, turning, milling and thread cutting of hard and brittle materials.
1336
Contents ml
Order No. 0050 0420
50 420
3.09 6.40 (001)
Tap and die extension
Design: Made of steel, annealed and bronzed (rust protected). The outer and inner squares are the same size. Application: For extending hand taps, hand reamers and other tools with a square mount.
DIN 377
1870
Square mm
Order No. 0210 0270 0340 0430 0490 0550 0620 0700 0800 0900 1100 1200 1450 1600 1800 2000
Length mm
For tap DIN 352
For tap DIN 5157
2.1 2.7 3.4 4.3 4.9 5.5 6.2 7.0 8.0 9.0 11.0 12.0 14.5 16.0 18.0 20.0
2.99 2.99 2.99 4.30 3.38 3.80 4.18 5.15 6.50 7.05
60 80 95 105 110 115 120 125 125 130 150 155 175 180 200 220
M1–2.6
– – – – – – – –
M3 M4
–
M4.5–8 M9–10
G 1/8"
M11 M12
–
M13/16
G 1/4" + 3/8"
10.35 13.50 18.50 19.60 22.90 29.40
M18 M20
–
G 1/2" G 5/8" G 3/4" G 7/8"
M22–24
M27 M30 M33
G 1"
(176)
1/221
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
Made with FlippingBook