html-Catalog FORMAT plus - EDE 2015 - 2017

First page Table of contents Previous page 28 Next page Last page

Drilling tools

Micro drills Design: HSS Co5, DIN 1899-A, type N. Special drill, bright surface, right cutting, with reinforced shank, high concentricity and precise point geometry. ∅ tolerance: on spiral part 0/–0.004 mm. Application: For drilling small holes with high drilling accuracy. Particularly suitable for high-alloy steels and for short and long chipping materials.

HSS Co5

DIN 1899-A

Type N

118°

25–30°

1 Cutting Tools

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1040

6WHHOV XSWR

1040

∅

Order No.

Spiral length mm

Total length mm

Shank ∅ h8 mm

Spiral length mm

Total length mm

Shank ∅ h8 mm

1PP

f mm/rev

bright

0010 0015 0020 0025 0030 0035 0040 0045 0050 0055 0060 0065 0070 0075

0.10 7.35 0.15 7.15 0.20 5.60 0.25 5.05 0.30 4.73 0.35 4.28 0.40 3.59 0.45 4.04 0.50 3.50 0.55 3.68 0.60 3.37 0.65 3.95 0.70 3.25 0.75 3.59

10 0.5 25 10 0.8 25 10 1.5 25 10 1.9 25 10 1.9 25 10 2.4 25 10 3.0 25 10 3.0 25 10 3.4 25 10 3.9 25 10 3.9 25 10 4.2 25 10 4.8 25 10 4.8 25

1.0 0.006 1.0 0.007 1.0 0.009 1.0 0.009 1.0 0.011 1.0 0.014 1.0 0.014 1.0 0.014 1.0 0.014 1.0 0.020 1.0 0.020 1.0 0.024 1.0 0.024 1.0 0.024

0080 0085 0090 0095 0100 0105 0110 0115 0120 0125 0130 0135 0140 0145

0.80 3.43 0.85 3.68 0.90 3.43 0.95 3.80 1.00 3.43 1.05 3.83 1.10 3.95 1.15 4.13 1.20 3.59 1.25 4.16 1.30 3.59 1.35 3.86 1.40 3.68 1.45 4.04

10 5.3 25 10 5.3 25 10 6.0 25 10 6.0 25 10 6.8 25 10 6.8 25 10 7.6 25 10 7.6 25 10 8.5 25 10 8.5 25 10 8.5 25 10 9.5 25 10 9.5 25 10 9.5 25

1.0 0.024 1.0 0.041 1.0 0.041 1.0 0.041 1.0 0.041 1.0 0.052 1.0 0.052 1.0 0.052 1.0 0.052 1.0 0.052 1.0 0.052 1.0 0.052 1.0 0.052 1.0 0.052

(100)

Further dimensions as well as left cutting or in VHM available on request.

Spiralbohrer Bit mit 1/4"-Bitschaft DIN 3126 Twist Drill Bit with 1/4" bit Shank I

Design: HSS, spiral fluted. Application: For drilling soft materials. For use in hand drills.

HSS

1038

1/4"

1041

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1038 1041

C C

V V

1041

1038

∅ mm

∅ mm 6.0 6.5 6.8 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.2

Order No. 0100 0150 0200 0250 0300 0330 0350 0400 0420 0450 0500 0550

Spiral length mm

Total length mm

Order No. 0600 0650 0680 0700 0750 0800 0850 0900 0950 1000 1020

Spiral length mm

Total length mm

1.0 1.5 2.0 2.5 3.0 3.3 3.5 4.0 4.2 4.5 5.0 5.5

3.02 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.82 3.43 2.92 3.54

32 32 34 36 38 40 40 44 45 46 50 50

2.92 3.54 2.92 3.54 2.92 3.54 2.92 3.54 3.43 4.15 3.43 4.15 3.93 4.77 3.93 4.77 4.38 5.35 4.38 5.35 4.38 5.35

26 30 30 30 32 32 33 33 38 38 38

50 50 50 50 51 51 53 53 54 54 54

10 12 14 16 18 18 20 20 24 26 26

(134)

(161)

(134)

(161)

Twist drill bit with 1/4" bit Shank

1038 1041

Set consisting of (order no. 1038). Set consisting of (order no. 1041).

1041

1038

Set contents

Order No. 0007 0019

2.0; 2.5; 3.0; 4.0; 5.0; 6.0; 8.0

27.40

–

1.0; 1.5; 2.0; 2.5; 3.0; 3.5; 4.0; 4.5; 5.0; 5.5; 6.0; 6.5; 7.0; 7.5; 8.0; 8.5; 9.0; 9.5; 10,

67.80 59.00

1041

1038

(134)

(161)

1/8

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).

Made with FlippingBook