html-Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 354

Solid Carbide 4 Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to company standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for machining hardened materials up to 62 HRC . Note: Copy milling; cutting values preferred at ap = 0.1 x d 1 and ae = 0.5 x d 1 .

Solid carbide UF

Z 4

Type H

Factory standard

DIN 6535-HA

30°

–5°bis–10°

2 Cutting Tools

2434

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2434

200

180

160

120

100

80

80

200

6WHHOV XSWR +5F f z mm

2434

dia.

Order No.

Corner radius r ± 0.02 mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

d 1

= h8

mm

Signum

0305 0405 0505 0610 0810 1015 1215 1620

3 4 5 6 8

38.80 39.20 39.20 42.30 53.10 71.40 96.70

0.5 0.5 0.5 1.0 1.0 1.5 1.5 2.0

5 6 8 9

57 57 57 57 63 72 83 92

2.7 3.7 4.7 5.7 7.7 9.5

21 21 21 21 27 32 38 44

6 6 6 6 8

0.030 0.035 0.038 0.040 0.050 0.070 0.080 0.100

12 15 18 24

10 12 16

10 12 16

11.5 15.5

160.50

(221)

Solid Carbide Long Series 4 Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to company standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for machining hardened materials up to 62 HRC . Note: Copy milling; cutting values preferred at ap = 0.1 x d 1 and ae = 0.5 x d 1 .

Solid carbide UF

Type H

Z 4

Factory standard

DIN 6535-HA

–5°bis–10°

30°

2435

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2435

200

180

160

120

100

80

80

200

6WHHOV XSWR +5F f z mm

2435

dia.

Order No.

Corner radius r ± 0.02 mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

d 1

= h8

mm

Signum

0610 0810 1015 1215 1620

6 8

79.30 94.10

1.0 1.0 1.5 1.5 2.0

9

75

5.7 7.7 9.5

39 64 60

6 8

0.040 0.050 0.070 0.080 0.100

12 15 18 24

100 100 150 150

10 12 16

121.00 181.00 282.50

10 12 16

11.5 15.5

105 102

(221)

2/108

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).