html-Catalog FORMAT plus - EDE 2015 - 2017

36

Drilling tools

Spiral drill with cyl. Shank, profile grinding

Design: HSS, DIN 338, Type N. Right cutting, profile grinding, with precise point geometry. Normal angle of rake, core thickness and core gradient. Application: Particularly suitable for steel and steel casting (alloyed and non-alloyed) grey cast iron, malleable cast iron, nodular iron, sintered iron and graphite.

DIN 338

Type N

HSS

118°

25–30°

1 Cutting Tools

1009 bright m 1001

Surface bright, from 3.0 mm cross cut according to DIN 1412 C.

1009

bright

Bright surface, steam tempered from 2.4 mm and with thinning similar to cross-grinding. Note: Available as a set (Order No. 1028 on Ç 1/18).

steam

1001

steam

1002

Bright surface, steam tempered from 2.4 mm and with thinning similar to cross-grinding. Note: Available as a set (Order No. 1002 on Ç 1/18).

steam

1002

dampf. steam

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1009 1001 1002

20 25 25

25 25

6WHHOV XSWR

1009

1001

1002

∅ h8

Order No.

PU

Spiral length

Total length

1PP

f mm/rev

mm

mm 2.5 3.0 5.0 6.0 7.0 9.0 10.0 11.0 12.0 14.0 16.0 16.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 27.0 27.0 30.0 30.0 30.0 33.0 33.0 33.0 33.0 36.0 36.0 36.0 39.0 39.0 39.0 39.0 43.0 43.0 43.0 43.0

mm

bright

steam

steam

0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410

0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1

– – – – – – – –

2.99 2.13 1.75 1.38 1.35 1.26 1.21 1.15 1.26 1.12 1.26 1.09 1.15 1.04 0.92 1.04 0.92 0.92 0.75 0.92 0.89 0.89 0.98 0.98 0.92 0.92 1.04 1.04 0.89 1.06 1.06 1.06 1.06 0.98 1.06 1.12 1.26 1.18 0.98 1.26 (100)

5.80 4.12 3.54 2.74 2.74 2.48 2.37 2.21 2.17 2.14 2.17 2.09 2.02 1.79 1.75 1.75 1.64 1.68 1.34 1.60 1.68 1.72 1.68 1.68 1.75 1.75 1.75 1.75 1.48 1.87 1.87 1.87 1.87 1.68 2.06 2.14 2.17 2.29 1.75 2.48 (105)

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

19 19 20 22 24 28 30 32 34 36 38 38 40 40 43 43 46 46 49 49 53 53 57 57 57 61 61 61 61 65 65 65 70 70 70 70 75 75 75 75

0.010 0.010 0.010 0.010 0.016 0.016 0.016 0.016 0.016 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.063 0.063 0.063 0.063 0.063 0.080 0.080 0.080 0.080 0.080 0.080 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100

0.91 0.82 0.91 0.80 0.83 0.74 0.67 0.74 0.67 0.67 0.54 0.67 0.64 0.64 0.70 0.70 0.67 0.67 0.74 0.74 0.64 0.76 0.76 0.76 1.32 0.70 0.76 0.82 0.91 0.86 0.70 0.91 (118)

Continued overleaf

1/16

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).