html-Catalog FORMAT plus - EDE 2015 - 2017

467

Cutting conditions

P M K N S H

Finishing and fine-spindles at high cutting speeds, best machining results, no vibrations

01

Drilling and copying at high cutting speeds, good machining results, with small to medium chip cross-cutting

10

Drilling and copying at medium cutting speeds, for medium to slightly adverse chipping conditions

2 Cutting Tools

20

Turning and facing at medium cutting speeds, and adverse chip conditions (break in cutting)

30

Toughness

Wear resistance

Turning, grooving and parting at low to medium cutting speeds and very adverse working conditions (break in cutting)

40

Turning and parting at very low cutting speeds, extremely adverse working conditions (severe breaks in cutting)

50

Carbide, coated PK 9015 AL 2

0 3

CVD/PVD multi-layer coating, main application area is in groups P and K, also possible in M group, for preparation and roughing work, continuous, slight interrupted cut, high cutting speeds

PMK 9030 TiCN

CVD coating, main application area is in groups P, M and K, S group also possible, for preparation and roughing work, continuous, and interrupted cut, medium to high cutting speeds CVD coating, main application area is in groups P, M and K, S group also possible, for roughing work, adverse conditions, severe interrupted cut, low to medium cutting speeds

PMK 9040 TiCN

KNH 9010 TiCN

CVD coating, universal use for finishing in all groups, for operations with high thermal load, low to medium depth of cut, high cutting speeds in stable conditions

U

9035 TiCN

CVD coating, universal use in all groups, high wear resistance, adverse conditions, medium cutting speeds

VA 9040 TiCN

CVD coating, main application area in groups M and P, S also possible. For finishing in medium processing of VA steels, standard interrupted cut, medium cutting speeds. Medium processing VA geometry for processing stainless steel. lightweight cutting. Also 1. option with very tough steels.

Carbide, uncoated N 9020 Ultra-fine grain uncoated, main application area group N, fine and finest processing of

groups M and S, in stable conditions, low to medium depth of cut, highly polished to prevent edge build-up

2/221