html-Catalog FORMAT plus - EDE 2015 - 2017
543
Scroll chuck
3-jaw scroll chuck ZS
Design: With short taper mounting DIN 55029 with stud bolt for camlock. Steel body with one-piece jaws and scroll, central clamping. Application: For universal use on lathes, rotary tables, indexing devices, etc. Supplied: 3-jaw chuck with chuck key and mounting screws with one each set of outward stepped jaws (inside jaws) and inward stepped jaws (rotary jaws). Note: Replacement jaws are found on Ç 3/4.
with retention stud for camlock
DIN 55029
3014
3014
Size A mm
Size A mm
Short taper
Through- hole dia. E mm
Taper size B mm
Height D mm
Short taper
Through- hole dia. E mm
Taper size B mm
Height D mm
Order No.
Order No.
Max. speed RPM min -1
Max. speed RPM min -1
ZS Steel
ZS Steel
0001 0003 0005 0007 0009 0011 0013
100 398.20 ◊ 125 498.00 ◊ 160 637.00 160 637.00 ◊ 200 835.00 200 835.00 250 1095.00
3 4 4 5 5 6 6
20 32 42 42 55 55 76
53.9 75.0 6300 63.5 69.0 5500 63.5 66.0 4600 82.5 66.0 4600 82.5 74.5 4000 106.4 74.5 4000 106.4 83.0 3000
0015 0017 0019 0021 0023 0025
250 1095.00 315 1630.00 ◊ 315 1630.00 ◊
8 6 8
76 139.7 83.0 3000 103 106.4 96.0 2300 103 139.7 96.0 2300 103 196.9 104.0 2300 136 139.7 106.0 1800 136 196.6 106.0 1800
315 1630.00 ◊ 11
Systems
3 Clamping
400 3190.00 ◊
8
400 3190.00 ◊ 11
(301)
(301)
4-jaw scroll chuck ZS cast-steel
Design: With cylindrical central mount DIN 6350, form A. Cast iron or steel body with one-piece jaws and scroll, central clamping. Application: For universal use on lathes, rotary tables, indexing devices, etc. Supplied: 4-jaw chuck with chuck key and mounting screws with one each set of outward stepped jaws (inside jaws) and inward stepped jaws (rotary jaws). Note: Replacement jaws are found on Ç 3/4.
DIN 6350
Form A
3018 3019
Cast
ZS steel
3018
3019
Size A mm 80 100 125 160 200 250 315 400 500
Order No.
Jaw height J mm
Centring depth C mm
Max. speed RPM min -1 3019 3018
Through- hole dia. E mm
Centring hole B mm
Height without jaws D mm
Inch
Cast
ZS Steel
0080 0100 0125 0160 0200 0250 0315 0400 0500
–
391.00 ◊ 425.00 ◊ 531.00 679.00 891.00 1170.00 1740.00 ◊ 3400.00 ◊ 5400.00 ◊
3.1/4
19 20 32 42 55 76 103 136 190
56 70 95 125 160 200 260 330 420
39.5 50.0 56.0 65.0 73.5 82.0 95.0 105.0 120.0
14.0 18.0 22.5 26.0 32.5 40.0 46.0 43.0 54.5
3 3 4 4 4 5 5 5 5
7000
–
426.50 m 435.00 m 476.00 m 568.50 m 738.00 m 1377.00 m
4 5
6300 4500 5500 4000 4600 3600 4000 3000 3000 2500 2300 2000
6.1/4
8
10
12.1/4 15.3/4
– –
1800 1300
– –
20
(300)
(301)
4-jaw scroll chuck
Design: With short taper mounting DIN 55027. Steel body with one- piece jaws and scroll, central clamping. Application: For universal use on lathes, rotary tables, indexing devices, etc. Supplied: 4-jaw chuck with chuck key and mounting screws with one each set of outward stepped jaws (inside jaws) and inward stepped jaws (rotary jaws). Note: Replacement jaws are found from Ç 3/4.
DIN 55027
3021
3021
Size A mm 100 125 160 160 200 200 250
Size A mm 250 315 315 315 400 400
Short taper
Through- hole dia. E mm
Taper size B mm
Height D mm
Short taper
Through- hole dia. E mm
Taper size B mm
Height D mm
Order No.
Order No.
Max. speed RPM min -1
Max. speed RPM min -1
ZS steel
ZS steel 1230.00 1830.00 ◊ 1830.00 ◊
0001 0003 0005 0007 0009 0011 0013
446.00 ◊ 558.00 ◊ 713.00 713.00 936.00 936.00 1230.00
3 4 4 5 5 6 6
20 32 42 42 55 55 76
53.9 75.0 6300 63.5 69.0 5500 63.5 66.0 4600 82.5 66.0 4600 82.5 74.5 4000 106.4 74.5 4000 106.4 83.0 3000
0015 0017 0019 0021 0023 0025
8 76 139.7 83.0 3000 6 103 106.4 96.0 2300 8 103 139.7 96.0 2300
1830.00 ◊ 11 103 196.9 104.0 2300
3570.00 ◊
8 136 139.7 106.0 1800
3570.00 ◊ 11 136 196.6 106.0 1800 (301)
(301)
3/3
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
Made with FlippingBook