html-Catalog FORMAT plus - EDE 2015 - 2017

655

3D probe

Universal 3D probe, IP 67

Design: Protection class IP 67. Precision Universal 3D probe for installation into the milling spindle or the countersunk head; the spindle axis is positioned precisely on the workpiece or device edges. Any approach direction (X, Y, Z-axis). The dial gauge always deflects in the same direction and indicates the distance between the spindle axis and the workpiece edge. As soon as the display is set to zero, the spindle axis is positioned without prolonged attempts; without calculations, without sign problems, precisely on the edge of the workpiece. This reduces the additional costs. increases productivity and relieves employees. The probe tip is changed without requiring a tool; recalibration of the probe is not necessary. The enlarged travel path in combination with the tried and tested predetermined breaking point provide additional safety. For maximum measuring accuracy, all universal 3D probes are individually measured and aligned during installation. For extremely easy handling, the Universal 3D probe is available with an integrated steep taper adaptor (Order No. 3770 0010). The steep taper (DIN 69871, SK 40) and Universal 3D probe form one unit. Application: For setting workpiece zero points and length measurements on milling and eroding machines (insulated probe tip) and for centring and taking the mean of bore holes and shafts. Supplied: 3D probe and short probe tip ∅ 4 mm. Note: The new-generation probe tips also fit into the available universal 3D probe.

IP 67

Systems

3 Clamping

3770

Shaft ∅

Order No. 0005

Ball tip ∅ mm

Display accuracy mm

Housing ∅ mm

Length without clamping shaft mm

20 mm

276.00 298.00

4 4

0.01 0.01

65 65

113 113

0010 SK 40/DIN 69871

(392)

Digital 3D probe, IP 64

Design: The digital 3D probe is a further development of the tried and tested mechanical 3D probe. The spindle or countersunk head can be positioned quickly and reliably on the reference edges. The start-up process can be traced accurately on the digital dial gauge. The zero setting is found immediately. The machine measuring system can be zeroed without calculations, as the spindle axis stands directly on the probed edge. Digit height of the LC display 8.5 mm, in this way the values remain unambiguous and correctly readable from a distance, even on large machining centres. Function: Switch-on and switch-off, mm/inch-conversion. Application: For setting workpiece zero points and length measurements on milling and eroding machines (insulated probe tip) and for centring and taking the mean of bore holes and shafts. Supplied: 3D probe with battery and short probe tip ∅ 4 mm. Note: The new-generation probe tips also fit into the available Universal 3D probe.

IP 64

3775

Shaft ∅

Order No.

Ball tip ∅

Display accuracy mm

Repeat accuracy mm

Measuring accuracy mm

Housing ∅

Length without clamping shaft

mm

mm

mm

mm 113

0005

20

490.00

4

0.001

0.001

0.005

65

(392)

3/115

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.