html-Catalog FORMAT plus - EDE 2015 - 2017

66

Drilling tools

1 Cutting Tools Design: HSS, according to factory standard, type N. Very torsion stable model, profile grinding, right cutting, with precise point geometry. Short form according to DIN 1897, point thinning according to DIN 1412, form A. Normal angle of rake, core thickness and core gradient. Drilling and countersinking are produced in a single step, aligned to each other. ∅ tolerance: d 1 = h6. Note: The cutting speed is orientated towards the large diameter, the feed towards the small diameter. Short stepped drill with cyl. Shank

Type N

Factory standard

HSS

118°

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1100 1101 1103 1104 1106 1107

16 18 16 18 16 18

30 30 30 30 30 30

30 33 30 33 30 33

50 65 50 65 50 65

90° short stepped drill for through-holes

Design: 90° countersink angle, fine. Application: For screw through-holes according to DIN EN 20273 and 90° screw head countersinking. Form A and B according to DIN 74, part 1. For screws according to DIN 963 and DIN 964. Particularly suitable for CNC or NC machines.

1100

bright

1100

1101

for tapped holes

Order No.

Drill ∅ d 1 x countersink ∅ d 2 mm

Overall length l 1 mm

Spiral length I 2 mm

Drill step length l 3 mm

1101 TiN

bright

TiN

0030 0040 0050 0060 0080 0100

M3 M4 M5 M6 M8

13.55 21.10 15.40 23.10 19.35 29.60 22.60 33.30 26.10 42.80 39.30 64.30

3.2 x 6.0 4.3 x 8.0 5.3 x 10.0 6.4 x 11.5 8.4 x 15.0 10.5 x 19.0

66 79 89 95 111 127

28 37 43 47 56 64

9

11 13 15 19 23

M10

(104)

(109)

90° short stepped drill for thread core holes

Design: 90° countersink angle. Application: For thread core holes according to DIN 336, part 1 and 90° free countersinking corresponding with the through-holes according to DIN EN 20273. Particularly suitable for CNC or NC machines.

1103

bright

1103

1104

for tapped holes

Order No.

Drill ∅ d 1 x countersink ∅ d 2 mm

Overall length l 1 mm

Spiral length I 2 mm

Drill step length l 3 mm

1104 TiN

bright

TiN

0030 0040 0050 0060 0080 0100 0120

M3 M4 M5 M6 M8

12.70 18.15 13.05 18.15 14.20 19.80 14.60 21.10 17.40 25.20 22.40 32.20 28.70 41.30

2.5 x 3.4 3.3 x 4.5 4.2 x 5.5 5.0 x 6.6 6.8 x 9.0 8.5 x 11.0 10.2 x 13.5

52 58 66 70 84 95 107

20 24 28 31 40 47 54

8.8 11.4 13.6 16.5 21.0 25.5 30.0

M10 M12

(104)

(109)

180° short stepped drill for through-holes

Design: 180° countersink angle, medium. Application: For screw through-holes according to DIN EN 20273 and 180° screw head countersinking. Form H, J and K according to DIN 84, DIN 912, DIN 6912, DIN 7513 and DIN 7984. Particularly suitable for CNC or NC machines.

1106

bright

1106

1107

for tapped holes

Order No.

Drill ∅ d 1 x countersink ∅ d 2 mm

Spiral length I 2 mm

Drill step length l 3 mm

Overall length l 1 mm

1107 TiN

bright

TiN

0030 0040 0050 0060 0080 0100

M3 M4 M5 M6 M8

12.70 20.20 17.65 22.60 21.80 28.50 20.80 33.00 26.20 41.30 39.60 63.50

3.4 x 6 4.5 x 8 5.5 x 10 6.6 x 11 9.0 x 15 11.0 x 18

66 79 89 95 111 123

28 37 43 47 56 62

9

11 13 15 19 23

M10

(104)

(109)

1/46

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).