html-Catalog FORMAT plus - EDE 2015 - 2017

669

Machine vices and accessories

Clamping solutions such as the embossing method are fully respon- ding to current trends. In the process, a mark is being embossed onto the workpiece in an embossing station. Special embossing jaws grip exactly into these small recesses on the clamping action into the vice.

Exactly this very effect the innovative RÖHM claw jaws offer. Yet using this technology, your goals will be achieved even faster and more cost- effectively. Because ‘embossing’and clamping are carried out in one single processing step –and you can spare an embossing station.

Sets of claw jaws for NC compact clamping systems.

Design: With hardened claw tips. Thus the clamping forces are increased by factor 3–5 in contrast to standard jaws and 5-side machining is enabled in one clamping. This results in less loss of material on the workpiece, shorter machining times as well as shortened production and costs per piece. Application: Can be used for manual or hydraulic clamping of unmachined and sawn parts on vices. Universally usable by screwing onto the RÖHM NC compact clamping system. Clever alternative to stamping.

3847 3859

Claw jaw SKB with fine stage.

3847

Claw jaw SKB without fine stage.

3859

3847

For jaw width mm

Order No. 0092 0125 0160

∅ c mm

B mm

C mm

a mm

b mm

Systems

3 Clamping

92 125 160

340.00 ◊

280.00 ◊

7 (M6) 14 32 63 13.6 9 (M8) 16 40 80 15.6 9 (M8) 18 50 100 19.6

420.00 590.00

350.00 490.00

(335)

(335)

3859

NC compact centric vice

Design: Steel body and guides are hardened and ground on all sides. Short, compact design with large clamping stroke and constant clamping force. Application: Ideal for use on machining centres, milling machines and grinding machines. Particularly suitable for 5-sided machining.

Supplied: Compact clamping system with stepped jaws. Note: For clamping jaws and set of T-nuts see Ç 3/128.

3858

Jaw width mm

Order No. 0005 0015 0020 0025

Jaw height mm

Jaw span mm

Tension force kN

Weight kg

50 70 92 125

1100.00 ◊ 1300.00 ◊ 1900.00 2400.00

20 25 32 40

0–39 0–58 0–76 0–97

10 15 20 25

3.5 7.0 18.0 32.5

(333)

Hand crank

Design: With internal octagon. For compact clamping system RKZ-M.

3848

for size

Order No. 1110 1115 1120 1125

Internal octagon x length mm

50 70 92 125

28.00 28.00 35.00 42.00

12 x 80 14 x 125 19 x 160 19 x 200

(335)

Drive adapter

Design: For torque spanners. For central clamp RKZ-M.

3848

for size

Order No. 2050 2070 2100

Hexagon x square spanner size

50 70

55.00 55.00 75.00

8 x 12 10 x 14 14 x 19

92/125

(335)

3/129

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.