html-Catalog FORMAT plus - EDE 2015 - 2017

675

Clamping elements and accessories

Precision parallel guide, pair

Design: Case-hardened and height-ground in pairs acc. to pair tolerance IT 5. Absolute measure to DIN 7168 medium. Application: Preferably for smaller up to medium sized machines. They are adapted in their thickness to machine T-slots with tolerance H 8. A pair of these stops is plugged into a machine T-slot and then the workpieces can quickly be aligned in parallel to the table. Can additionally be used as parallels for machine T-slots. Note: Several uniform pairs are available upon request for an additional charge.

3913

Dimensions w x h x l mm

Order No.

Pair tolerance h mm

Nominal size tolerance DIN 7168 m h mm

Tolerance h7 mm

0010 0020 0030 0040 0050 0060 0070 0075 0080 0090

8 x 25 x 100 10 x 32 x 100 12 x 40 x 100 14 x 50 x 100 16 x 50 x 160 18 x 63 x 160 20 x 63 x 160 22 x 80 x 160 24 x 80 x 160 28 x 100 x 160

85.70 91.90

0.009 0.011 0.011 0.011 0.011 0.013 0.013 0.013 0.013 0.015

0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

0.015 0.015 0.018 0.018 0.018 0.018 0.021 0.021 0.021 0.021

105.50 114.50 127.50 149.50 157.00 235.00 261.00 296.50

Systems

3 Clamping

(342)

Cover rail for T-slot

Design: Made from aluminium profile. Cutting to desired length is possible without any problems using a fine saw blade. Note: Cleaning the machine table groove no longer necessary. Before processing always cover the free slots with the cover strips. After processing, they can be removed easily.

3914

Slot width x length mm

Order No. 0012 0014 0016 0018 0022 0028 0036

12 x 1000 14 x 1000 16 x 1000 18 x 1000 22 x 1000 28 x 1000 36 x 1000

17.65 18.65 20.10 20.80 23.20

29.70 m 34.60 m (342)

3/135

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.