html-Catalog FORMAT plus - EDE 2015 - 2017

691

Clamping elements and accessories

Clamping mandrel XPA

Design: Made of construction steel, with hardened and coated clamping screw. The mounting flange diameter is concentric to the clamping diameter so that high repeat accuracy of the parts is achieved. Application: Almost every workpiece (e.g. turned part, milled part, drilled parts, etc.) has at least one hole and exactly this one is used for clamping by means of clamping mandrel XPA. Thus clamping takes place from inside enabling machining of the 2nd side without problem. The compact dimensions allow multi-face machining without disturbing edges for the tool. The clamping mandrel can be machined and can be adapted to the respective diameters by turing and milling. Can be automated using hydraulic and pneumatic equipment. Supplied: Clamping mandrel with 3 fastening screws, without internal Allen key.

Systems

3 Clamping

3917

Clamping range F mm 4.1– 7.4 7.2– 12.4 12.2– 14.4 13.5– 20.0 18.0– 27.0 23.0– 35.3 29.3– 42.0 29.3– 51.5 29.3– 77.7 29.3–103.0

Order No.

Size A mm 10.7 21.8 24.9 24.9 28.6 31.8 39.6 39.6 45.5 45.5

Size B mm 7.6 16.0 19.0 19.0 22.2 25.4 31.8 31.8 37.6 37.6

Size C mm 6.1 15.0 15.0 15.0 17.5 20.6 27.0 27.0 32.3 32.3

Size D mm

Size E mm

Measure- ment G mm

Measure- ment h mm

I clamping screw

J

mm 4.1 8.0 12.0 14.0 17.0 21.0 22.0 22.0 20.0 20.0

0380 0390 0400 0410 0420 0430 0440 0450 0460 0470

65.50 66.20 69.50 73.30 94.30

3.0 20.00 4.1 5.9 29.72 7.2 5.9 31.50 12.2 5.9 37.50 13.5 6.4 50.00 18.0 6.4 56.00 23.0 7.9 69.50 29.3 7.9 75.50 29.3 7.9 107.50 29.3 7.9 132.90 29.3

M2 M3 M3 M3 M4 M4 M5 M5 M6 M6

M2 M4 M6 M8

M10 M12 M16 M16 M16 M16

117.00 150.50 161.00 281.50 361.50

(343)

Size G is the smallest diameter to which size F can be milled or turned.

3/151

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.