html-Catalog FORMAT plus - EDE 2015 - 2017

719

Magnetic clamping devices

BM permanent-magnetic clamping plate

Design: With transverse pole pitch A strong permanent-ceramic magnet system with low installation height and narrow pole pitch enables deployment for many tasks. A long and maintenance-free service life is ensured by the cast iron base body and robust upper plate as well as through the magnetic system. Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. Attachment on the machining tables is done using 2 clamping jaws. Lines of force: approx. 8 mm above the pole plate, therefore no magnetisation of the tools. Holding force: max. 80–100 N/cm 2 with ground workpiece clamping surface. Application: Ideal for machining on surface grinding machines. Can furthermore be used on spark erosion systems.

Supplied: Clamping plate with 2 stop bars. Note: Further dimensions upon request.

Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. The clamping plates are normally supplied with 2 stop bars.

Systems

3 Clamping

3958

Table surface A x B mm

Order No. 0010 0020 0030 0040 0050 0060

Pole pitch mm St 6/NE 5 St 6/NE 5 St 6/NE 5 St 6/NE 5 St 6/NE 5 St 6/NE 5

Base area C x D mm

F mm

Weight kg

250 x 150 300 x 150 350 x 150 400 x 200 450 x 200 500 x 200

762.00 ◊ 884.50 ◊ 981.00 ◊ 1430.00 ◊ 1556.00 ◊ 1691.00 ◊

258 x 147 308 x 147 358 x 147 413 x 197 463 x 197 515 x 197

65 65 65 72 72 72

15 18 21 32 36 40

(350)

BM permanent-magnetic clamping plate

Design: With transverse pole pitch in reinforced magnetic design. The double and enhanced permanent-ceramic magnet system distributes the clamping force extremely high and evenly. A long and maintenance-free service life is ensured by the massive cast iron base body and robust upper plate as well as through the magnetic system. Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. Attachment on the machining tables is done using 2 clamping jaws. Lines of force: approx. 10 mm above the pole plate, therefore no magnetisation of the tools. Holding force: max. 120–150 N/cm 2 with ground workpiece clamping surface. Application: Für difficult cutting machining. Ideal for milling, planing, drilling, grinding and eroding.

Supplied: Clamping plate with 2 stop bars. Note: Further dimensions upon request.

Machining of the upper plate without impairing the holding force is possible up to a depth of 15 mm in steel and 7 mm in NFM materials. The clamping plates are normally supplied with 2 stop bars.

3959

Table surface A x B mm

Order No. 0010 0020 0030 0040 0050 0060

Pole pitch mm St 8/NE 5 St 8/NE 5 St 8/NE 5 St 8/NE 5 St 8/NE 5 St 8/NE 5

Base area C x D mm

F mm

Weight kg

250 x 150 300 x 150 350 x 150 400 x 200 500 x 200 600 x 200

973.00 ◊ 1094.00 ◊ 1208.00 ◊ 1690.00 ◊ 1953.00 ◊ 2274.00 ◊

260 x 145 310 x 145 360 x 145 395 x 195 495 x 195 595 x 195

93 93 93 93 93 93

20 24 28 39 49 64

(350)

3/179

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.