html-Catalog FORMAT plus - EDE 2015 - 2017

85

Drilling tools

Solid Carbide spiral drill, 4 x D

Continued

1210

1210

∅d 1 = m7 mm

∅d 1 = m7 mm

Order No.

Spiral length I 2 mm

Order No.

Spiral length I 2 mm

Shank length I 3 mm

Overall length l 1 mm

Shank length I 3 mm

Overall length l 1 mm

Shank ∅ d 2 = h6 mm

Shank ∅ d 2 = h6 mm

1 Cutting Tools

f mm/rev

f mm/rev

TiAlN

TiAlN

0952 0960 0970 0980 0990 0992 1000 1010 1020 1030 1032 1040 1050 1060 1070 1080 1090 1100 1110 1111 1120 1130 1140

9.52 93.00 9.60 93.00 9.70 93.00 9.80 93.00 9.90 93.00 9.92 93.00 10.00 93.00 10.10 129.50 10.20 129.50 10.30 129.50 10.32 129.50 10.40 129.50 10.50 129.50 10.60 129.50 10.70 129.50 10.80 129.50 10.90 129.50 11.00 120.50 11.10 129.50 11.11 129.50 11.20 129.50 11.30 129.50 11.40 129.50

1150 1160 1170 1180 1190 1191 1200 1220 1250 1270 1300 1350 1370 1400 1420 1429 1450 1470 1500 1520 1550 1570 1600

11.50 129.50 11.60 129.50 11.70 129.50 11.80 129.50 11.90 129.50 11.91 129.50 12.00 120.50 12.20 164.50 12.50 164.50 12.70 164.50 13.00 154.00 13.50 164.50 13.70 164.50 14.00 154.00 14.20 203.00 14.29 203.00 14.50 203.00 14.70 203.00 15.00 190.50 15.20 203.00 15.50 203.00 15.70 203.00 16.00 190.50

47 40 89 10 0.200 47 40 89 10 0.200 47 40 89 10 0.200 47 40 89 10 0.200 47 40 89 10 0.200 47 40 89 10 0.200 47 40 89 10 0.200 47 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200

55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 102 12 0.200 55 45 107 14 0.200 60 45 107 14 0.200 60 45 107 14 0.250 60 45 107 14 0.250 60 45 107 14 0.250 60 45 107 14 0.250 60 45 107 14 0.250 60 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250 65 48 115 16 0.250

(117)

(117)

Solid Carbide small fitting drill, 5 x D

Design: solid carbide, according to factory standard. TiAIN coated surface, right cutting, with special point geometry and ratio point thinning. Normal angle of rake, without core gradient. Drill with internal cooling. The drill has a very good self-centring behaviour and produces short chips, even from long-chipping materials. Application: For accurate alignment drilling with very narrow ∅ tolerances and good surfaces. Suitable for drilling holes up to 5 x D with high cutting values. Particularly suitable for long and short-chipping materials such as construction and case-hardening steels, steel castings, tempered steels, carbon steels, bronzes, castings, high alloy AlSi alloys and alloy steels up to 1400 N/mm 2 in strength.

Solid carbide

Factory standard

5xD

140°

30°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1211

65

50

70

55

6WHHOV XSWR

6WHHOV XSWR

1211

1211

∅ = m 7 mm

∅ = m 7 mm

Order No.

Spiral length mm

Total length mm

Shank ∅ = h 6 mm

Order No.

Spiral length mm

Total length mm

Shank ∅ = h 6 mm

1PP

1PP

f mm/rev

f mm/rev

TiAlN

TiAlN

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9

42.10 42.10 42.10 42.10 42.10 42.10 42.10 42.10 42.10 42.10

8

55 55 55 55 55 55 55 55 55 55

3 3 3 3 3 3 3 3 3 3

0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045 0.045

0200 0210 0220 0230 0240 0250 0260 0270 0280 0290

2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9

42.10 42.10 42.10 42.10 42.10 42.10 42.10 42.10 42.10 42.10

21 21 21 21 21 21 21 21 21 21

57 57 57 57 57 57 57 57 57 57

4 4 4 4 4 4 4 4 4 4

0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055

12 12 12 12 16 16 16 16 16

(110)

(110)

1/65

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.