html-Catalog FORMAT plus - EDE 2015 - 2017
873
Vices
Design: Die-forged, jaws and anvil inductive-hardened (52–58 HRC), anvil surface suitable for straightening and compressing work. Front-opening, precise clamping thanks to adjustable wbearing, which is protected from dirt by a wiper. Parallel vice
5015
With holder for swivelling and interchangeable pipe clamping jaws. Note: For swing clamps and replacement pipe rams see (Order No. 5028 and 5029).
5010
With welded pipe-clamping jaws.
5015
5010
5015
Jaw width mm
Order No.
Jaw span mm
Clamping depth mm
Hole spacing mm
Hole ∅ mm
Anvil surface mm
Weight
kg
0115 0125 0135 0150
115 125 135 150
120.50 130.00 132.50 142.00 161.00 172.00 180.50 192.50
140 70 102 13.5 46 x 60 7.8 160 75 113 13.5 50 x 70 9.4 170 85 120 16.0 57 x 75 14.0 190 100 137 16.0 65 x 80 18.5
(500)
(500)
5010
Design: Steel-forged, freely adjustable with lock screw. Application: Rotates the vice by 360°. Rotary plate
5006
For jaw width mm
Order No. 0125 0135 0150
Weight kg
125 135 150
40.90 42.20 46.10
1.3 1.4 2.0
5006
(500)
Spare jaw for parallel vice
Design: Suitable for parallel vices (Order No. 5013 and 5015).
5028
Swivel-mounted pipe clamping jaw (only one required), forged and hardened, for secure and firm clamping (3-point clamping) of pipes. Plastic protective jaw (2 units required), for the gentle clamping of sensitive items.
5 Hand Tools
5029
5029
5028
For jaw width mm
Order No. 0120 0140 0160 0180
5028
120 140 160 180
28.90 35.40 39.40 43.30
31.50 33.70 36.00 39.00
5029
(500)
(500)
Precision parallel vice
Design: Heavy, solid design made of high-strength grey cast iron, the best clamping precision thanks to the long and precise dovetail guide. Concealed, dirt-proof and smooth-running acme thread spindle, interchangeable and reversible hardened steel jaws, integrated pipe clamping jaws, opens to rear and with large anvil surface for simple straightening work. Application: Suitable for multiple uses thanks to its solid construction and especially precise guiding/clamping.
5004
Jaw width mm
Order No. 0100 0125 0150
Jaw span mm
Clamping depth mm
Weight kg
100 125 150
198.50 230.50 358.50
140 180 280
84 88 98
12.5 24.0 41.0
5004
(501)
Design: The automatic gas-pressured spring adjustment up to max. 215 mm gives smooth vertical adjustment and 360° rotation. Supplied without fixing screws. Height adjuster, automatic
5005
Jaw width mm
Order No. 0100 0125 0150
Weight kg
100 125 150
217.00 217.00 217.00
9.0 10.0 11.0
5005
(501)
5/3
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
Made with FlippingBook