html-Catalog FORMAT plus - EDE 2015 - 2017

99

SDS-plus hammer drill

SDS-plus hammer drill

1250

Design: Hammer drill with SDS-plus shank Effective drilling dust removal due to the aggressive tip and twist design. Certified by the Prüfgemeinschaft Mauerbohrer (PGM) according to the requirements of the Deutschen Instituts für Bautechnik (DIBt). Application: Concrete, limestone, masonry. Design: Patented blade design according to the bionic principle guarantees a high service life and aggressive drilling. Revised Twinmax 3D spiral for optimal drilling dust removal, quieter running drills and optimal impact energy throughput. Low probability of breakage in case of armouring hits due to the HST annealed surface. Certified by the Prüfgemeinschaft Mauerbohrer (PGM) according to the requirements of the Deutschen Instituts für Bautechnik (DIBt). Application: Concrete, masonry, concrete reinforcement, limestone, marble, brick.

1 Cutting Tools

1255

1255

1255

1250

1250

∅

∅

Order No.

Spiral length mm

Total length mm

Order No.

Spiral length mm

Total length mm

mm 4.0 4.0 5.0 5.0 5.0 5.5 5.5 5.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.5 6.5 6.5 6.5 7.0 7.0 7.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 11.0 11.0 11.0 11.0 12.0 12.0 12.0 12.0 12.0

mm 12.0 12.0 12.0 12.0 13.0 13.0 13.0 13.0 13.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 15.0 15.0 15.0 15.0 15.0 15.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 18.0 18.0 18.0 18.0 18.0 18.0 19.0 19.0 16.0

0411 0416 0511 0516 0521 0550 0551 0552 0611 0616 0621 0626 0626 0631 0635 0650 0651 0653 0654 0711 0716 0721 0811 0816 0821 0826 0831 0846 0860 0916 1011 1016 1021 1026 1031 1035 1046 1046 1060 1000 1116 1121 1126 1131 1216 1221 1226 1230 1231

2.05

3.34 3.69 2.69 2.90 3.45 2.69 2.90 6.95 2.66 2.90 4.96 6.00 2.66 3.69 5.70 3.69 3.89 4.87 3.49 3.59 4.28 4.83 7.75 4.04 4.04 4.23 4.87 6.00 6.85 8.45 – 9.00

50 110 100 160 50 110 100 160 150 210 50 110 100 160 150 210 50 110 100 160 150 210 200 160 200 260 250 310 300 350 50 110 100 160 150 210 230 295 50 110 100 160 150 210 50 110 100 160 150 210 200 260 250 310 400 460 550 600 100 160 50 110 100 160 150 210 200 260 250 310 300 350 950 1000 100 160 150 210 200 260 250 310 100 160 150 210 200 260 250 300 250 310 400* 400* 550* 450 460 600

1245 1246 1260 1200 1299 1315 1321 1325 1330 1345 1416 1420 1421 1425 1426 1430 1431 1445 1446 1460 1400 1515 1516 1520 1525 1526 1545 1615 1620 1621 1625 1630 1645 1660 1680 1600 1699 1820 1825 1825 1830 1845 1860 1880 1800 1920 1945 2020 2030

–

11.95

400 450

–

7.35

–

400* 550*

460 600

1.65 1.78

12.0**

11.95

19.50 48.60

– – – – – –

950 1000 1350 1400 100 150 150 210 200 250 250 300 400 450 100 160 150 200 150 210 200 250 200 260 250 300 250 310 400 450 950 1000 100 150 100 160 150 200 200 250 200 250 400 450 100 150 150 200 150 210 200 250 250 300 750 800 950 1000 1350 1400 150 200 200 260 200 250 250 300 550 600 750 800 950 1000 150 200 400 450 150 200 250 300 400* 550* 460 600 400* 550* 450 600 400* 450

– – – –

120.00

5.15

8.55

–

9.75

1.63 1.78 3.04

10.35 20.60

4.31

7.00 8.55

–

–

3.67

5.25

–

– – – –

–

9.45

13.55

5.80

–

–

10.05

6.15

–

3.52

–

14.70

– –

11.40

9.00

–

14.0**

19.10

21.80 53.40

2.38

– –

–

9.30

2.16 2.20 2.64 2.97 4.77 7.30 2.46 2.57 2.99 3.67 4.20 – –

8.15

–

– –

10.10 10.95

9.60

–

–

23.60

11.90 17.05

5.80

9.45

–

10.50

6.40

–

11.40

13.05 15.45 20.40 22.30 31.40 57.00

16.0**

9.50

12.50 13.70

16.0**

– – –

–

6.15

–

131.00

– – – – – – –

10.05 17.30 44.00

18.0**

15.45 11.80

17.60

–

–

19.30 21.10 22.30 32.80 43.70 65.20 20.70 24.90 21.30 24.30

5.50 6.25 7.95 9.60 4.58 5.35 6.85

12.95 13.70

18.0**

– – – – –

2.82 3.30 4.20 5.85

–

20.0**

18.60 14.85

–

9.50

20.0

(120)

(119)

(120)

(119)

* Pre-drill at least 150 mm deep with a short drill of the same diameter. ** Designed as a twist hammer drill

Continued overleave

1/79

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.