Catalog FORMAT Plus- 2017 - 2018

Milling tools 324

Solid Carbide Vari-Helix 4 Flute End Mill Set

Design: Solid carbide, type N, DIN 6527, with centre cut. Application: Can be used for milling keyways and feather key grooves as well as for universal machining.

Type N

Z 4

DIN 6527

Solid carbide

35°/38°

2461 TiAlN 2462

Set consisting of (order no. 2483).

Set consisting of (order no. 2462).

Fire

Cutting Tools 2

2461

TiAlN

2462 Fire

2461

2462

Set content ∅

Order No.

mm

TiAlN

Fire

0020

6; 8; 10; 12; 16

170.50 (W212)

296.00 (W220)

Design: Ultra-fine grit solid carbide, type N, according to factory standard, 35°/38°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended. Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 3 x D. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized. Solid Carbide Long Series Vari-Helix 4 Flute End Mills

Type N

Z 4

Solid carbide

Factory standard

DIN 6535-HA

35°/38°

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2463

170

170

130

110

100

50

50

200

130

520

6WHHOV XSWR

2463

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Shank ∅ d 2

h6

1PP

f z mm

mm

mm

mm 100 150 150 150 150

mm

Fire

1000 1200 1600 2000 2500

10 12 16 20 25

90.00

40 45 65 65 75

10 12 16 20 25

0.065 0.079 0.095 0.110 0.165

130.50 246.50 327.00 443.00 (W220)

2/70