Catalog FORMAT Plus- 2017 - 2018

Milling tools 325

Design: Ultra-fine grit solid carbide, type NH, DIN 6527, 36/38°, TiAIN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling as well as for universal machining. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 36°/38° results in particularly smooth running and thus extremely good workpiece surface quality for finishing milling operations. In addition, feeds higher by up to 60% can be realized for slot cutting and rough milling. A much longer tool life is achieved than with conventional tools. Solid Carbide Vari-Helix 4 Flute End Mills

Type N

Z 4

DIN 6527

Solid carbide

DIN 6535-HB

36°/38°

Cutting Tools 2

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2407

170

170

100

70

200

520

130

6WHHOV XSWR

2407

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Neck ∅ d 3

Clear area l 3

Shank ∅ d 2

h6

1PP

f z mm

mm

mm

mm

mm 3.7 4.7 5.5 7.5 9.2 11.2 15.0 19.0

mm

mm

TiAlN

0400 0500 0600 0800 1000 1200 1600 2000

4 5 6 8

35.00 35.00 35.00 47.80 71.60 90.60

8 9

54 54 54 58 66 73 82 92

18 18 18 22 26 28 34 42

6 6 6 8

0.028 0.028 0.039 0.053 0.065 0.079 0.095 0.110

10 12 14 16 22 26

10 12 16 20

10 12 16 20

158.00 240.50 (W221)

Solid Carbide Necked Vari-Helix 4 Flute End Mills

Design: Solid carbide, type N, DIN 6527, 35°/38°, TiAIN-coated, with centre cut.

Type N

Z 4

DIN 6527

Solid carbide

36°/38°

Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 1 x D. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized.

DIN 6535-HB

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2409

180

140

70

70

170

200

80

2409

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Neck ∅ d 3

Clear area l 3

Shank ∅ d 2

h6

f z mm

mm

mm

mm

mm 2.7 3.7 4.7 5.5 7.5 9.2 11.2 15.0 19.0

mm

mm

TiAlN

0300 0400 0500 0600 0800 1000 1200 1600 2000

3 4 5 6 8

35.40 33.80 33.80 41.10 56.00 84.00

8

57 57 57 57 63 72 83 92

21 21 21 21 27 32 38 44 54

6 6 6 6 8

0.015 0.015 0.025 0.039 0.053 0.065 0.079 0.095 0.110

11 13 13 19 22 26 32 38

10 12 16 20

10 12 16 20

107.00 184.50 283.00 (W221)

104

2/71

Articles marked ◊ are not held in stock, procurement is effected at short notice.