Catalog FORMAT Plus- 2017 - 2018

Milling tools 348

Solid carbide torus cutter for hard machining.

Design: Ultra-fine grit solid carbide, type N, according to factory standard, 30°, TiAlN- coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.

Type N

Z 4

Solid carbide

Factory standard

DIN 6535-HA

30°

HSC

0

Application: Can be used for peripheral milling. With corner radius to avoid notching effects on the workpiece. Suitable for HSC machining up to 62 HRC .

TiAlN

Cutting Tools 2

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2436

133

82

82

82

55

50

133

25

6WHHOV XSWR +5F f z

6WHHOV XSWR +5F f z

2436

2436

∅ d 1

∅ d 1

Order No.

Corner radius r mm

Cutting length l 2 mm

Order No.

Corner radius r mm

Cutting length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

TiAlN

TiAlN

mm

mm

mm

mm

0300 0400 0500

3 29.80 4 29.80 5 29.80

0.30 4.0 50 2.8 7 6 0.003 0.40 5.0 50 3.7 9 6 0.004 0.50 6.0 50 4.6 12 6 0.005

0600 0800 1000

6 29.80 8 38.20 10 56.50

0.60 7.0 55 5.6 14 6 0.006 0.80 10.0 60 7.4 18 8 0.008 1.00 12.0 70 9.4 25 10 0.009

(W212)

(W212)

Solid Carbide 4 Flute End Mill with Corner Radius

Design: Ultra-fine grit solid carbide, type N, DIN 6527 L, 30°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. These tools should only be used in shrink or hydro-.expansion chucks. Application: Suitable for plunge cutting, slot cutting and contour

Type N

Z 4

DIN 6527

Solid carbide

DIN 6535-HA

30°

HSC

milling with corner radius to avoid notching effects on the workpiece – less corner wear during plunge cutting and slot cutting. Suitable for HSC machining.

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2492

130

130

120

80

80

40

120

30

300

130

6WHHOV XSWR

2492

∅ d 1

h10

Order No.

Corner radius r

Cutting length l 2 mm

Clear area l 3

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3

1PP

f z mm

mm

mm 0.5 1.0 0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.0 1.0 1.5 2.0 1.0 1.5 2.0

mm

mm

Fire

0605 0610 0805 0810 0815 0820 1005 1010 1015 1020 1205 1210 1215 1220 1610 1615 1620 2010 2015 2020

6 6 8 8 8 8

27.20 27.20 37.80 37.80 37.80 37.80 56.00 56.00 56.00 56.00 71.60 71.60 71.60 71.60

13 13 19 19 19 19 22 22 22 22 26 26 26 26 32 32 32 38 38 38

57 57 63 63 63 63 72 72 72 72 83 83 83 83 92 92 92

5.7 5.7 7.7 7.7 7.7 7.7 9.5 9.5 9.5 9.5

21 21 27 27 27 27 32 32 32 32 38 38 38 38 44 44 44 54 54 54

6 6 8 8 8 8

0.024 0.024 0.032 0.032 0.032 0.032 0.038 0.038 0.038 0.038 0.046 0.046 0.046 0.046 0.054 0.054 0.054 0.066 0.066 0.066

10 10 10 10 12 12 12 12 16 16 16 20 20 20

10 10 10 10 12 12 12 12 16 16 16 20 20 20

11.5 11.5 11.5 11.5 15.5 15.5 15.5 19.5 19.5 19.5

119.50 119.50 119.50 178.00 178.00 178.00 (W221)

104 104 104

2/94