Catalog FORMAT Plus- 2017 - 2018

Milling tools 349

Solid Carbide 4 Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to factory standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for machining hardened materials up to 62 HRC . Note: Copy milling, cutting values preferred at ap = 0.1 x d 1 and ae = 0.5 x d 1 .

Type H

Z 4

Solid carbide

Factory standard

DIN 6535-HA

30°

Cutting Tools 2

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2434

200

180

160

120

100

80

80

200

6WHHOV XSWR +5F f z mm

2434

∅ d 1

h8

Order No.

Corner radius r ± 0.02 mm

Cutting length l 2 mm

Clear area l 3

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3

mm

mm 2.7 3.7 4.7 5.7 7.7 9.5 11.5 15.5

mm

Signum

0305 0405 0505 0610 0810 1015 1215 1620

3 4 5 6 8

41.10 41.10 41.10 44.50 56.00 75.80

0.5 0.5 0.5 1.0 1.0 1.5 1.5 2.0

5 6 8 9

57 57 57 57 63 72 83 92

21 21 21 21 27 32 38 44

6 6 6 6 8

0.030 0.035 0.038 0.040 0.050 0.070 0.080 0.100

12 15 18 24

10 12 16

10 12 16

103.00 169.50 (W221)

Solid Carbide Long Series 4 Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to factory standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for machining hardened materials up to 62 HRC . Note: Copy milling, cutting values preferred at ap = 0.1 x d 1 and ae = 0.5 x d 1 .

Type H

Z 4

Solid carbide

Factory standard

DIN 6535-HA

30°

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2435

200

180

160

120

100

80

80

200

6WHHOV XSWR +5F f z mm

2435

∅ d 1

h8

Order No.

Corner radius r ± 0.02 mm

Cutting length l 2 mm

Neck ∅ d 3

Clear area l 3

Shank ∅ d 2 h6 mm

Overall length l 1

mm

mm 75 100 100 150 150

mm 5.7 7.7 9.5 11.5 15.5

mm 39 64 60 105 102

Signum

0610 0810 1015 1215 1620

6 8

84.00 99.60

1.0 1.0 1.5 1.5 2.0

9

6 8

0.040 0.050 0.070 0.080 0.100

12 15 18 24

10 12 16

128.50 192.50 299.50 (W221)

10 12 16

2/95

Articles marked ◊ are not held in stock, procurement is effected at short notice.