Catalog FORMAT Plus- 2017 - 2018

Milling tools 350

Solid Carbide 4 Flute End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type N, according to factory standard, 30°, TiAlN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling. With corner radius to avoid notching effects on the workpiece. Suitable for HSC machining up to 70 HRC .

Type N

Z 4

Solid carbide

Factory standard

DIN 6535-HA

HSC

30°

Cutting Tools 2

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2437

80

52

52

52

32

32

80

32

6WHHOV XSWR +5F f z mm

2437

∅ d 1

e8

Order No.

Corner radius r

Cutting length l 2

Overall length l 1

Shank ∅ d 2

h6

mm

mm 0.3 0.3 0.3 0.5 0.3 0.5 0.5 0.5 1.5 2.0

mm

mm

mm

TiAlN

0300 0400 0500 0602 0800 0802 1002 1202 2006 2008

3 4 5 6 8 8

37.60 37.60 37.60 37.60 48.10 48.10 71.20 97.60

12 15 20 20 25 25 30 30 55 55

50 50 60 60 70 70 90 90

6 6 6 6 8 8

0.002 0.003 0.005 0.007 0.010 0.010 0.012 0.012 0.012 0.012

10 12 20 20

10 12 20 20

305.00 305.00 (W212)

110 110

Solid Carbide Long Series Multi Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide (K50), type H, according to factory standard, 55°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high-precision finishing. For large milling depth up to 3 x D. Ideal for use in mould-making and dip working thanks to the neck chip channel and corner radius with long range. The extremely high spiral lead and reinforced core results in particularly smooth running and thus low deviation in shape and a very good surface on the workpiece. Suitable for HSC machining up to 62 HRC .

Type H

Z 6

Solid carbide

Factory standard

DIN 6535-HA

HSC

55°

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2388

55

45

200

40

40

6WHHOV XSWR +5F f z mm

2388

∅ d 1

h10

Order No.

Corner radius r

Cutting length l 2 mm

Neck ∅ d 3

Clear area l 3

Shank ∅ d 2 h6 mm

Overall length l 1

mm

mm 0.5 0.5 0.5 1.0 1.0

mm 75 100 100 150 150

mm 5.7 7.7 9.5 11.5 15.5

mm 39 64 60 105 102

Signum

0600 0800 1000 1200 1600

6 8

43.60 48.60 86.40

13 19 22 26 32

6 8

0.024 0.032 0.038 0.046 0.054

10 12 16

10 12 16

121.00 215.50 (W221)

2/96