Catalog FORMAT Plus- 2017 - 2018

Drill chuck 558

MK extension sleeve

Design: Standard design, similar to DIN 2187, male taper ground. Application: For mounting tools with Morse taper shank.

3466

3466

MK outer/inner

MK outer/inner

Order No. 0001 0004 0007 0010 0013 0016 0019 0022 0025

Total length mm

Order No. 0028 0031 0034 0037 0040 0043 0046 0049 0052

Total length mm

1/1 1/2 2/1 2/2 2/3 3/1 3/2 3/3 3/4

11.25 13.30 13.30 16.05 18.75 16.05 19.45 22.90 26.30 (W314)

145 160 160 175 200 175 194 215 240

4/1 4/2 4/3 4/4 4/5 5/2 5/3 5/4 5/5

19.45 23.60 27.60 31.80 53.60 28.30 33.10 53.60 67.20 (W314)

200 215 240 265 300 247 268 300 335

Systems

Clamping

Taper chuck for taps

3

Design: DIN 6328, with Morse taper for mounting cylindrical taps with driving squares. Strong and positive locking mounting Completely hardened.

DIN 6328

3476

3476

Type

Type

Order No. 0001 0003 0005 0007 0009 0011 0013 0015 0017 0019 0021 0023 0025 0027 0029

Hole ∅ mm

MK outer

K mm

L mm

Order No. 0031 0033 0035 0037 0039 0041 0043 0045 0047 0049 0051 0053 0055 0059 0061

Hole ∅ mm

MK outer

K mm

L mm

FM501/1 18.70 FM501/1 18.70 FM501/1 18.70 FM501/1 18.70 FM501/1 18.70 FM501/1 18.70 FM501/1 18.70 FM501/1 18.70 FM501/2 21.00 FM501/2 21.00 FM501/2 21.00 FM501/2 21.00 FM501/2 21.00 FM501/2 21.00 FM501/2 21.00

3.5

1 12.2 65.5 1 12.2 65.5 1 12.2 65.5 1 12.2 65.5 1 12.2 65.5 1 12.2 65.5 1 12.2 65.5 1 12.2 65.5 2 18 80 2 18 80 2 18 80 2 18 80 2 18 80 2 18 80 2 18 80

FM501/2 21.00 FM501/3 28.20 FM501/3 28.20 FM501/3 28.20 FM501/3 28.20 FM501/3 28.20 FM501/3 28.20 FM501/3 28.20 FM501/4 41.65 FM501/4 41.65 FM501/4 41.65 FM501/4 41.65 FM501/4 41.65 FM501/4 41.65 FM501/4 41.65

12

2 18 80 3 24.1 99 3 24.1 99 3 24.1 99 3 24.1 99 3 24.1 99 3 24.1 99 3 24.1 99 4 31.6 124 4 31.6 124 4 31.6 124 4 31.6 124 4 31.6 124 4 31.6 124 4 31.6 124

4

8 9

4.5

5

10 11 12 14 16 12 14 16 18 20 22 25

5.5

6 7 8 6 7 8 9

5.5

10 11

(W315)

(W315)

Design: DIN 317, made of special steel, hardened and in burnished colour. Application: For tool tapers DIN 228. Order No. MK 3469 Total length mm 0001 0 2.30 90 0004 1–2 2.81 140 0007 3 4.46 190 0010 4 9.25 225 0013 5–6 15.05 265 (W314) Taper drift Design: Made from special steel, hardened and annealed in burnished colour. With one-hand operation for easy driving out without additional tools. Application: For tool tapers DIN 228. Order No. MK 3472 Total length mm 0001 1–3 45.60 330 0004 4–6 62.50 380 (W314) Taper drift - semi-automatic

DIN 317

3/36