Catalog FORMAT Plus- 2017 - 2018

Tool holders 598

Precision clamping nut HPC

Design: For use in the FAHRION CENTRO P for high performance cutting, with double-cylinder guide, trapezoidal thread and coated surface to reduce friction, for high holding torque and to improve concentricity.

R

3657 3008– 3016 3657 1016– 1032

Design: Mini with extreme slim structure.

Design: Normal.

3657

Type

Order No. 3008 3011 3016 Order No. 1016 1025 1032

Clamping range mm

Max. dia. mm

Total length mm

For collet chuck

HPC8M* HPC11M* HPC16MS*

38.00 33.00 33.00 (W315)

1– 5 1– 7 1–10

10 16 22

12

GERC8-HP GERC11-HP

16.2 20.9

GERC16-HP, -HPD

Systems

Clamping

3657

Type

Clamping range mm

Max. dia. mm

Total length mm

For collet chuck

3

HPC16 HPC25 HPC32

28.00 31.00 33.00 (W361)

1–10 2–16 2–20

30 40 50

23.4 25.6 26.9

GERC16-HP, -HPD

GERC25-HP, -HPD, -HPDD GERC32-HP, -HPD, -HPDD

Roller spanner for HPC clamping nuts

Design: For use on the FAHRION CENTRO P. Function key with standard handle. Application: Enables uncomplicated clamping of tools without risk of injury, no slipping as possible with standard or hook spanners. Note: The outer diameter of the clamping nuts must comply with the DIN tolerances.

3657

For clamping nut

Order No. 0010 0016 0024 0300 0400 0500 0630

∅ mm

HPC8M HPC11M HPC16MS

74.00 58.50 58.50 58.50 58.50 58.50 65.00 (W361)

10 16 22 30 40 50 63

HPC16/ST16 HPC25/ST25 HPC32/ST32 HPC40/ST40

Torque roller wrench attachment DRO

Design: With VKT adaptation to the defined tightening of the clamping nuts with a torque wrench. Note: The outer diameter of the clamping nut must comply with DIN tolerances. Torque wrenches can be found from Ç 6/106.

3657

For clamping nut

Order No. 0916 0930 1440 1450

Square mm 9 x 12 9 x 12 14 x 18 14 x 18

HPC11M

58.50 58.50 58.50 58.50 (W361)

HPC16/ST16 HPC25/ST25 HPC32/ST32

3/76