Catalog FORMAT Plus- 2017 - 2018

Tapping chuck 635

Precision collet Rubber-Flex

Design: The lamellas move parallel across the whole clamping range which results in constant concentricity. With high radial clamping force, the rubber is resistant to cooling lubricants and temperatures up to 100 °C. Application: For bridging large diameters when clamping tools with cylindrical shank. For use in thread cutting devices, drill holders and tool holders.

R

1869

1869

Collet diameter mm

Collet diameter mm

Order No. 0115 0116 0117 0420 0421 0422 0423

Collet type

Order No. 0440 0441 0443 0445 0461 0462

Collet type

1 – 2.5 2.5– 4.5 4.5– 6.5

33.70 33.70 33.70 34.30 34.30 34.30 34.30 (W357)

710E RFJ115 710E RFJ116 710E RFJ117 715E RFJ420 715E RFJ421 715E RFJ422 715E RFJ423

7 –13

38.00 37.90 38.00 40.60 88.60 88.60 (W357)

750E RFJ440 750E RFJ441 750E RFJ443 750E RFJ445 766E RFJ461 766E RFJ462

4.5– 9.7

2.8– 7 10 –15 9.1–16 16 –23

4.5– 8

3.5– 6.5

6.5–10

Systems

Clamping

2 – 4.5

3

Thread cutting device with Morse taper

Design: You save time during the reversing action because the tap returns faster thanks to the planetary gear (2:1). Immediately effective reversal on changing feed direction. Continuous setting of the safety clutch by turning the sleeve nut with guide value scale. Simple turning of the cam disc enables changing the cam coupling to surface friction for small threads. Suitable for both right-hand and left-hand threads. The continuously clamping jaws can accommodate all tap shanks within the cutting range, including those with intermediate and inch sizes. Application: For thread cutting on all hand-fed bench drills and box column drills and where the rotational direction cannot be reversed.

R

1878

Cutting range in steel

Order No. 0005 0010 0015 0020 0025 0030

MK

Clamping range mm

Speed max. min -1

D mm 69 69 82 82 105 105

L mm 156 158 183 183 244 246

M3 - M10 M3 - M10 M6 - M16 M6 - M16 M14 - M27 M14 - M27

383.00 383.00 522.00 522.00 822.00 822.00

1 2 2 3 3 4

2.5–10 2.5–10

600 600 400 400 250 250

4.5–12.5 4.5–12.5 11 –22.4 11 –22.4

(W180)

Tapping device

Design: Maintenance-free and can be used for left and right hand threads. Application: Automatic thread cutting on drilling machines with manual feed.

1872

For taps

Order No. 1201 1202 1203 2002 2003 2004

MK Length compensation, tension mm

Notching path mm

For insert type

M3 - M12 M3 - M12 M3 - M12 M8 - M20 M8 - M20 M8 - M20

478.00 468.50 468.50 566.50 556.00 556.00 (W289)

1 2 3 2 3 4

12.5 12.5 12.5 16.5 16.5 16.5

6 6 6 8 8 8

FE1/FES1 FE1/FES1 FE1/FES1 FE2/FES2 FE2/FES2 FE2/FES2

3/113

Articles marked ◊ are not held in stock, procurement is effected at short notice.