Catalog FORMAT Plus- 2017 - 2018

Probe 645

Universal 3D probe

Design: Protection class IP 67. Precise Universal 3D probe for incorporating in the milling spindle or countersunk head; the spindle axis is positioned accurately on the workpiece or device edges. Any approach direction (X, Y, Z-axis). The dial gauge always deflects in the same direction and indicates the distance between the spindle axis and the workpiece edge. As soon as the display is set to zero, the spindle axis is positioned without prolonged attempts; without calculations, without sign problems, precisely on the edge of the workpiece. This reduces the additional costs. increases productivity and relieves employees. The probe tip is changed without requiring a tool; recalibration of the probe is not necessary. The enlarged travel path in combination with the tried and tested predetermined breaking point provide additional safety. For maximum measuring accuracy, all universal 3D probes are individually measured and aligned during installation. For extremely easy handling, the Universal 3D probe is available with an integrated steep taper adaptor (Order No. 3770 0010). The steep taper (DIN 69871, SK 40) and Universal 3D probe form one unit. Application: For setting workpiece zero points and length measurements on milling and grinding machines (insulated probe tip) as well as for centring holes and spindles. Scope of delivery: 3D probe and short probe tip ∅ 4 mm. Note: The new generation probe tips are also compatible with existing Universal 3D probes. Replacement probe tip (Order No. 3777 Ç 3/125).

IP 67

Systems

Clamping

3

3770

Shank ∅

Order No. 0005 0010

Ball tip ∅ mm

Display accuracy mm

Housing ∅ mm

Length without clamping shank mm

20 mm

285.00 307.00 (W392)

4 4

0.01 0.01

65 65

113 113

SK 40/DIN 69871

Digital 3D probe

Design: Protection class IP 64. The digital 3D probe is a development of the tried and tested mechanical 3D probe. The spindle or countersunk head can be positioned quickly and reliably on the reference edges. The start-up process can be traced accurately on the digital dial gauge. The zero setting is found immediately. The machine measuring system can be zeroed without calculations, as the spindle axis stands directly on the probed edge. Digit height of the LC display 8.5 mm, in this way the values remain unambiguous and correctly readable from a distance, even on large machining centres. Function: Switch-on and switch-off, mm/inch-conversion. Application: For setting workpiece zero points and length measurements on milling and grinding machines (insulated probe tip) as well as for centring holes and spindles. Scope of delivery: 3D probe with battery and short probe tip ∅ 4 mm. Note: The new generation probe tips are also compatible with existing Universal 3D probes. Replacement probe tip (Order No. 3777 Ç 3/125).

IP 64

3775

Shank ∅

Order No.

Ball tip ∅

Display accuracy mm

Repeat accuracy mm

Measuring accuracy mm

Housing ∅

Length without clamping shank mm

mm

mm

mm

0005

20

506.00 (W392)

4

0.001

0.001

0.005

65

113

3/123

Articles marked ◊ are not held in stock, procurement is effected at short notice.