Catalog FORMAT Plus- 2017 - 2018

First page Previous page 646 Next page Last page

Probe 646

Zero Master analogue

Design: Protection class IP 67. Smallest 3D probe in the world, for incorporating in the milling spindle or countersunk head; the spindle axis is positioned accurately on the workpiece or device edges. Any approach direction (X, Y, Z-axis). The size of the Zero Master is adapted to small machines. The small, analogue dial gauge always deflects in the same direction and indicates the distance between the spindle axis and the workpiece edge. As soon as the display is set to zero, the spindle axis is positioned without prolonged attempts; without calculations, without sign problems, precisely on the edge of the workpiece. This reduces the additional costs. increases productivity and relieves employees. The clamping shaft has a diameter of 10 mm and can therefore also be used on machines with SK 30 or with small HSK spindles. Large workpieces can also be measured through the shortened housing, which projects only a little way out of the spindle. The probe tip is changed without requiring a tool; recalibration of the probe is not necessary. The enlarged travel path in combination with the tried and tested predetermined breaking point provide additional safety. For maximum measuring accuracy, all 3D probes are individually measured and aligned during installation. The Zero Master can be equipped with a short (ball ∅ 4 mm) and a long (ball ∅ 8 mm) probe tip. The probe tips are compatible with all other Haimer 3D probes. Application: For setting workpiece zero points and length measurements on milling and grinding machines (insulated probe tip) as well as for centring holes and spindles. Scope of delivery: 3D probe with short probe tip ∅ 4 mm. Note: Replacement probe tip (Order No. 3777 Ç 3/125).

IP 67

Systems

Clamping

3777

Shank ∅ mm

Order No. 0000

Ball tip ∅ mm

Display accuracy mm

Housing ∅ mm

Length without clamping shank mm

285.00 (W392)

0.01

3D probe NEW GENERATION

Design: Protection class IP 67. Further development of the Universal 3D probe, with improved mechanism and new, compact, handy housing, for incorporating in the milling spindle or countersunk head. The spindle axis is positioned accurately on the workpiece or device edges. Any approach direction (X, Y, Z-axis). The large, analogue 1/100 mm dial gauge (2 pointers) with marked travel path (safety distance) always deflects in the same direction and indicates the distance between the spindle axis and the workpiece edge. As soon as the display is set to zero, the spindle axis is positioned without prolonged attempts; without calculations, without sign problems, precisely on the edge of the workpiece. This reduces the additional costs. increases productivity and relieves employees. The original Haimer probe tip for max. accuracy of 0.01 mm is changed without requiring a tool; recalibration of the probe is not necessary. The enlarged travel path in combination with the tried and tested predetermined breaking point provide additional safety. For maximum measuring accuracy, all 3D probes are individually measured and aligned during installation. Application: For setting workpiece zero points, length and depth measurements on milling and grinding machines (insulated probe tip) as well as for centring holes and spindles. Also used for testing the straightness and evenness of surfaces. Scope of delivery: 3D probe with short probe tip ∅ 4 mm. Replacement probe tip (Order No. 3777 Ç 3/125).