Catalog FORMAT plus 2017 - 2018

HSS circular saw blades 363

Carbide Tipped Circular Saw Blade

2680

Design: Trapeze flat tooth, positive The cutting speed should not be below 50 m/s for aluminium and 30-40 m/s for solid material. Application: Mainly for use on circular saw benches which cut against the direction of feed. For profiles and solid material, format, mitre and longitudinal cuts in aluminium and other non-ferrous metals as well as for cutting synthetic resins, mainly thicker cross-sections. Design: Trapeze flat tooth, negative The cutting speed should not be below 50 m/s for aluminium and 30-40 m/s for solid material. Application: Mainly for use on mitre saws with oscillating saw blades or other circular saw benches which cut against the direction of feed. For thin-walled profile made of aluminium and plastic, particularly anodised profiles.

Carbide

2683

Cutting Tools 2

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2680 2683

40 40

2680

∅ x Stärke x Bohrung mm

Order No. 0001 0004 0007 0010 0016 0019 0031 0034 0037 0040 0043 0046 0055 0061 0064 Order No. 0001 0004 0007 0010 0016 0019 0022 0028 0031 0034 0037 0040 0043 0046 0049 0052 0055 0058 0067

Number of teeth

Number NL/∅/circular pitch mm

Tooth pitch T 13.08 9.81 13.08 9.81 11.99 13.08 9.81 13.08 13.08 10.18 13.08 10.18 Tooth pitch T 13.08 9.81 13.08 9.81 11.99 13.08 9.81 9.81 9.81 10.36 13.08 13.08 10.18 13.08 10.18 13.08 10.47 13.08

250 x 3.2 x 30 250 x 3.2 x 30 250 x 3.2 x 32 250 x 3.2 x 32 275 x 3.4 x 40 300 x 3.2 x 30 300 x 3.2 x 40 350 x 3.6 x 30 350 x 3.6 x 32 350 x 3.4 x 32 350 x 3.6 x 40 350 x 3.6 x 40 400 x 3.6 x 40 420 x 4.0 x 40 500 x 4.0 x 30 250 x 3.4 x 30 250 x 3.4 x 30 250 x 3.4 x 32 250 x 3.2 x 40 275 x 3.2 x 40 300 x 3.4 x 30 300 x 3.2 x 30 300 x 3.2 x 32 300 x 3.2 x 40 330 x 3.4 x 32 350 x 3.4 x 30 350 x 3.8 x 32 350 x 3.4 x 32 350 x 3.4 x 40 350 x 3.4 x 40 350 x 3.4 x 50 400 x 3.4 x 30 400 x 3.4 x 40 500 x 4.4 x 30

95.80

60 80 60 80 72 72 96 84 84 108 84 108

2/10/60 2/10/60

113.50

97.10

2/8/45 + 4/12/64 2/8/45 + 4/12/64 2/8/55 + 4/12/64

112.50 107.00 119.00 137.00 148.50 147.00 163.50 148.50 162.00 151.00 208.50 258.00 (W242)

2/10/60

2/8/55 + 4/12/64

2/10/60

2/8/45 + 4/12/64 2/8/45 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64

Tooth shape = trapeze-flat-positive 5°

96 2/8/55 + 4/12/64 + 2/12/80 13.08 96 2/8/55 + 4/12/64 + 2/12/80 13.74

120

–

2683

∅ x Stärke x Bohrung mm

Number of teeth

Number NL/∅/circular pitch mm

86.40 99.00 87.20 97.80

60 80 60 80 72 72 96 96 96 100 84 84 108 84 108 84 120

2/7/42 + 2/10/60 2/7/42 + 2/10/60 2/8/45 + 4/12/64 2/8/45 + 4/12/64 2/8/55 + 4/12/64 2/8/45 + 4/12/64 2/8/55 + 4/12/64 2/8/45 + 4/12/64 2/8/45 + 4/12/64 2/8/45 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 – – –

103.50 108.50 124.00 121.50 121.50 161.00 137.00 140.00 144.50 140.00 143.50 137.00 226.00 213.50 279.00 (W242)

Tooth shape = trapeze-flat-negative 4°

4/15/80

–

96 2/8/55 + 4/12/64 + 2/12/80 13.08

120

–

13.08

2/109

Articles marked ◊ are not held in stock, procurement is effected at short notice.