Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 328

Solid Carbide Multi-Flute Carbide End Mill for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to company standard, 45°, TiAIN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high- precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Suitable for HSC machining up to 62 HRC.

Solid carbide UF

Type H

Z 6–8

Factory standard

DIN 6535-HA

HSC

45°

1°

2 Cutting Tools

2381

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti, Ti alloy and special steels

Rust and acid resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2381

118

87

87

34

34

34

118

34

6WHHOV XSWR +5F f z mm

2381

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= e8

mm

TiAlN

0060 0070 0080 0090 0100 0120 0140 0160 0180 0200 0250

6 7 8 9

27.30 34.50 34.50 51.60 51.60 70.20 87.80

13 16 19 19 22 26 26 32 32 38 44

57 63 63 72 72 83 83 92 92

6 8 8

6 6 6 6 6 6 6 6 8 8 8

0.012 0.014 0.016 0.018 0.020 0.020 0.024 0.017 0.015 0.014 0.014

10 10 12 14 16 18 20 25

10 12 14 16 18 20 25

118.00 138.00 173.50 306.00

104 104

(212)

Solid Carbide Multi-Flute Vari-Helix End Mill Design: Ultra-fine grit solid carbide, type NH, DIN 6527 L, 44°/45°/46°, fire-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 44°/45°/46° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools.

Solid carbide UF

Z 6

DIN 6527

Type NH

DIN 6535-HA

44°/45°/46°

7°

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti, Ti alloy and special steels

Rust and acid resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2456

170

170

100

70

200

520

130

6WHHOV XSWR

2456

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

Fire

0800 1000 1200 1600 2000 2500

8

40.90 66.20 88.90

19 22 26 32 38 45

63 72 83 92

7.5 9.2

8

0.053 0.065 0.079 0.095 0.110 0.165

10 12 16 20 25

10 12 16 20 25

11.2 15.0 19.0 23.5

159.50 228.50 428.50

104 121

(221)

2/82

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).