Catalog FORMAT plus - EDE 2015 - 2017

329

Milling Cutters

Solid Carbide Multi-Flute Long Series End Mill for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to company standard, 45°, TiAlN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high- precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Suitable for HSC machining up to 62 HRC.

Solid carbide UF

Type H

Z 6

Factory standard

DIN 6535-HA

HSC

45°

1°

l 1

d 1

d 2

l 2

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti, Ti alloy and special steels

Rust and acid resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2380

43

43

32

32

27

27

43

27

6WHHOV XSWR +5F f z mm

2380

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

d 1

= e8

mm

TiAlN

0600 0800 1000 1200 1600 2000 2500

6 8

35.00 46.10 71.70

26 36 46 56 66 76 92

70 90

6 8

0.023 0.028 0.031 0.035 0.040 0.047 0.046

10 12 16 20 25

100 110 130 140 180

10 12 16 20 25

100.50 175.00 274.50 514.50

(212)

Solid Carbide Multi-Flute End Mill

Design: Ultra-fine grit solid carbide, type NH, DIN 6527 L, 45°, fire-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high- precision finishing. The high spiral lead of 45° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools. Particularly suitable for machining stainless steel .

Solid carbide UF

Type NH

Z 6–10

DIN 6527

DIN 6535-HA

45°

7°

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti, Ti alloy and special steels

Rust and acid resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2484

170

170

90

105

200

55

900

220

6WHHOV XSWR

2484

dia. d1 = h10 mm

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

1PP

fz mm

Fire

0030 0040 0050 0060 0080 0100 0120 0160 0200 0250

3 4 5 6 8

27.00 25.50 24.00 24.00 29.50 45.00 62.00

8

57 57 57 57 63 72 83 92

6 6 6 6 8

6 6 6 6 6 6 6 6 8

0.015 0.025 0.025 0.031 0.042 0.050 0.059 0.071 0.090 0.130

11 13 13 19 22 26 32 38 45

10 12 16 20 25

10 12 16 20 25

111.00 155.00 256.00

104 121

10

(220)

2/83

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.