Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 330

Design: Ultra-fine grit solid carbide, type NH, according to company standard, 45°, fire-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high- precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. A much longer tool life is achieved than with conventional tools. Particularly suitable for machining stainless steel . Solid Carbide Long Series Multi-Flute End Mill

VHM UF Solid carbide F

Z 6–10 45°

Werks- norm Factory standard

Typ NH

y e

DIN 6535-HA

8°

INOX

45°

8°

2 Cutting Tools

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2485

170

170

90

105

200

55

900

220

6WHHOV XSWR

2485

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

1PP

d 1

= h10 mm

f z mm

Fire

0600 0800 1000 1200 1600 2000 2500

6 8

35.00 40.50 72.00

30 40 40 45 65 65 75

75

6 8

6 6 6 6 6 8

0.031 0.042 0.050 0.059 0.071 0.090 0.130

100 100 150 150 150 150

10 12 16 20 25

10 12 16 20 25

100.00 180.00 270.00 718.50

10

(220)

Design: Ultra-fine grid solid carbide (K50), type H, DIN 6527, 55°, Signum-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high- precision finishing. The extremely high spiral lead and reinforced core results in particularly smooth running and thus low deviation in shape and a very good surface on the workpiece. Suitable for HSC machining up to 56 HRC. Solid Carbide Multi-Flute End Mill for Hard Machining 55°

VHM UF Solid carbide UF

Z 6–8

DIN 6527

Typ H

y e

DIN 6535-HA

HSC

–5°bis–10°

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2385

55

45

200

6WHHOV XSWR +5F f z mm

2385

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

Signum

0300 0400 0500 0600 0800 1000 1200 1600 2000

3 4 5 6 8

44.40 41.40 39.60 39.60 45.30 78.40

8

57 57 57 57 63 72 83 92

6 6 6 6 8

6 6 6 6 6 6 6 6 8

0.003 0.009 0.009 0.011 0.016 0.021 0.026 0.032 0.038

11 13 13 19 22 26 32 38

10 12 16 20

10 12 16 20

106.50 188.00 268.50

104

(221)

2/84

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).