Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 332

Solid Carbide Stub Rippa Cutter for Hard Machining

Design: Ultra-fine grit solid carbide, type HR, according to company standard, 20°, TiAlN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Suitable for HSC machining up to 62 HRC.

Solid carbide UF

Type HR

Z 3–5

Factory standard

DIN 6535-HB

HSC

20°

9°

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2390

338

252

70

70

47

47

338

47

170

6WHHOV XSWR +5F f z mm

2390

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

TiAlN

0060 0080 0100 0120 0140 0160 0180 0200 0250

6 8

30.30 35.50 53.00 68.10 82.50

7 9

54 58 66 73 75 82 84 92

6 8

3 3 4 4 4 4 4 4 5

0.019 0.024 0.032 0.038 0.030 0.029 0.030 0.033 0.042

10 12 14 16 18 20 25

14 16 18 22 24 26 25

10 12 14 16 18 20 25

111.00 142.00 178.50 313.00

110

(212)

Design: Ultra-fine grit solid carbide, type HR, according to company standard, 20°, TiAlN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Particularly suitable for machining stainless steel and for HSC machining up to 62 HRC. Solid Carbide Rippa Cutter for Hard Machining

VHM UF Solid carbide F

Z 3–4 20°

Typ HR

y e

Werks- norm Factory standard

DIN 6535-HB

9°

HSC

INOX

20°

9°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2393

338

252

70

70

47

47

170

338

47

6WHHOV XSWR +5F f z mm

2393

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

TiAlN

0600 0800 1000 1200 1400 1600 1800 2000

6 8

37.60 43.90 65.60 84.30

13 19 22 26 26 32 32 38

57 63 72 83 83 92 92

6 8

3 3 4 4 4 4 4 4

0.025 0.032 0.032 0.038 0.030 0.029 0.030 0.033

10 12 14 16 18 20

10 12 14 16 18 20

102.00 137.00 176.00 221.00

104

(212)

2/86

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).