Catalog FORMAT plus - EDE 2015 - 2017

333

Milling Cutters

Solid carbide Rippa Cutter

Design: Ultra-fine grit solid carbide, type HR, according to company standard, 30°, TiAlN-coated. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Particularly suitable for machining stainless steel .

Solid carbide UF

Type HF

Z 3–5

Factory standard

DIN 6535-HB

INOX

30°

13°

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

6

2397

338

252

170

170

338

2397

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

f z mm

TiAlN

0600 0700 0800 0900 1000 1200 1400 1600 1800 2000 2500

6 7 8 9

36.70 42.90 42.90 64.10 64.10 82.40 99.90

16 16 16 19 22 26 26 32 32 38 45

57 63 63 72 72 83 83 92 92 104 121

6 8 8

3 3 3 4 4 4 4 4 4 4 5

0.021 0.025 0.028 0.024 0.026 0.032 0.037 0.038 0.035 0.033 0.038

10 10 12 14 16 18 20 25

10 12 14 16 18 20 25

134.00 172.00 216.00 379.00

(212)

Solid Carbide Necked 4 Flute Rippa Cutter

Design: Ultra-fine grit solid carbide, type HF, DIN 6527, 30°/32°, fire-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. The irregular spiral lead 30°/32° results in low-vibration running and thus a very high surface quality. A much longer tool life is achieved than with conventional tools.

VHM UF Solid carbide UF

Typ HF

Z 4

DIN 6527

y e

DIN 6535-HB 4°

30°/32°

DIN 6535-HB 4°

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2389

95

100

30

60

115

6WHHOV XSWR

2389

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

Fire

0060 0080 0100 0120 0160 0200

6 8

69.70 84.50 96.70

13 19 22 26 32 38

57 63 72 83 92

5.5 7.5 9.2

21 27 32 38 44 54

6 8

0.027 0.035 0.044 0.052 0.063 0.080

10 12 16 20

10 12 16 20

116.00 184.50 280.50

11.2 15.0 19.0

104

(221)

2/87

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.