Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 334

Solid Carbide 4 Flute Rippa Cutter

Design: Ultra-fine grit solid carbide, type NF, DIN 6527, 36°/38°, TiAIN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling, slot cutting and finishing milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. The irregular spiral lead 36°/38° results in low-vibration running and thus a very high surface quality. A much longer tool life is achieved than with conventional tools.

Solid carbide UF

Z 4

DIN 6527

Type NF

DIN 6535-HB

36°/38°

7°

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2392

95

100

115

90

60

130

6WHHOV XSWR

2392

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

TiAlN

0600 0800 1000 1200 1600 2000

6 8

69.70 84.50 96.70

13 19 22 26 32 38

57 63 72 83 92

5.5 7.5 9.2

21 27 32 38 44 54

6 8

0.025 0.032 0.039 0.048 0.058 0.073

10 12 16 20

10 12 16 20

116.00 184.00 280.50

11.2 15.0 19.0

104

(221)

Design: Ultra-fine grit solid carbide, type NRf, DIN 6527, 30°, fire-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. With inner cooling: Increase in tool life of up to 50 %, since chip blockage is reduced. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Solid Carbide 4 Flute Rippa Cutter with Through Coolant 30°

Solid carbide UF

DIN 6527

Type NRf

Z 4

DIN 6535-HB

9°

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2391

95

100

60

115

130

30

6WHHOV XSWR

2391

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

Fire

0600 0800 1000 1200 1600 2000

6 8

97.60

13 19 22 26 32 38

57 63 72 83 92

6 8

0.017 0.024 0.030 0.036 0.045 0.057

106.50 116.50 142.00 219.50 326.00

10 12 16 20

10 12 16 20

104

(221)

2/88

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).