Catalog FORMAT plus - EDE 2015 - 2017

345

Milling Cutters

m

Solid Carbide 2 Flute Necked Ball Nose Slot Drill for Aluminium

Design: Ultra-fine grit solid carbide, type W, according to company standard, 50°, bright, with centre cut. Application: Universal milling cutter for copy-milling work. Can be used to a limited extent for plunge cutting, traversing, peripheral milling, traverse milling and slot cutting. The extremely high spiral lead results in particularly smooth running and thus very good surface quality on the workpiece. Note: Copy milling; cutting values preferred at ap = 0.05 x d 1 and ae = 0.1 x d 1 .

Solid carbide UF

Z 2

Type W

Factory standard

DIN 6535-HA

50°

14°

2 Cutting Tools

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2517

460

166

$O $,DQG 0JDOOR\V f z mm

2517

dia.

Order No.

Radius r ± 0.01 mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

d 1

= h10 mm

bright

0600 0800 1000 1200 1600 2000

6 8

20.30 31.80 48.10 62.50

3 4 5 6 8

5.5 7.0 8.5

55 65 75 75 90

5.4 7.2 9.0

25 30 35 40 50 50

6 8

0.036 0.055 0.080 0.123 0.147 0.150

10 12 16 20

10 12 16 20

10.5 14.0 17.0

11.0 14.5 18.0

105.00 150.50

10

100

(212)

Solid Carbide 2 Flute Necked Ball Nose Slot Drills

Design: Ultra-fine grit solid carbide, type N, according to company standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. These tools should only be used in shrink or hydro-.expansion chucks. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. Suitable for machining hardened mate- rials up to 54 HRC . Note: Copy milling; cutting values preferred at ap = 0.05 x d 1 and ae = 0.1 x d 1 .

Solid carbide UF

Type N

Z 2

Factory standard

DIN 6535-HA

30°

8°

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2485

200

200

180

160

120

160

90

200

100

6WHHOV XSWR +5F f z mm

2485

dia.

Order No.

Radius r ± 0.01 mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

d 1

= h8

mm

Signum

0020 0030 0040 0060 0080 0100 0120

2 3 4 6 8

66.20 64.50 56.60 56.60 57.50 70.60

1.0 1.5 2.0 3.0 4.0 5.0 6.0

3.0 3.5 4.0 6.0 7.0 8.0

57 57 57 57 63 72 83

1.8 2.8 3.8 5.6 7.6 9.6

20 20 20 20 26 30 35

6 6 6 6 8

0.030 0.040 0.045 0.050 0.070 0.100 0.120

10 12

10 12

104.50

10.0

11.5

(221)

2/99

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.