Catalog FORMAT plus - EDE 2015 - 2017

351

Milling Cutters

Solid Carbide 2 Flute Torus Cutter with Corner Radius for Hard Machining

Design: Solid carbide NANO, type H, according to company standard, 30°, TiAlN-S-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: The tapered neck makes it suitable for copy milling and slot cutting especially in deep areas. With corner radius to avoid notching effects on the workpiece – less corner wear during plunge cutting and slot cutting. Recommended for HSC machining up to 56 HRC .

Z 2

Type H

Solid carbide NANO

Factory standard

DIN 6535-HA

HSC

30°

7°

TiAlN-S

2 Cutting Tools

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2427

66

66

42

25

6WHHOV XSWR +5F f z mm

2427

dia. d 1 mm

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Shank dia.

d 2

= h6

TiAlN-S

0050 0052 0060 0062 0080 0082 0100 0102 0120 0122 0150 0152 0200 0202

0.5 0.5 0.6 0.6 0.8 0.8 1.0 1.0 1.2 1.2 1.5 1.5 2.0 2.0

36.60 36.60 36.60 36.60 33.00 33.00 29.50 29.50 29.50 31.20 29.50 29.50 28.00 30.40

0.05 0.05 0.05 0.05 0.05 0.05 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15

0.7 0.7 0.9 0.9 1.2 1.2 1.5 1.5 1.8 1.8 2.2 2.2 2.2 2.2

50 50 50 50 50 50 50 50 50 50 50 50 50 50

0.45 0.45 0.55 0.55 0.75 0.75 0.95 0.95 1.15 1.15 1.45 1.45 1.95 1.95

1.5 3.3 2.0 4.0 2.5 5.5 3.3 6.7 4.4 8.0 5.0 9.7 6.0

6 6 6 6 6 6 6 6 6 6 6 6 6 6

0.002 0.002 0.002 0.002 0.004 0.004 0.004 0.004 0.004 0.004 0.006 0.006 0.008 0.008

13.0

(212)

Solid Carbide 2 Flute Torus Cutter with Corner Radius for Hard Machining

Design: Solid carbide (K05/10), type N, according to company standard, 30°, Signum-coated, with tapered neck – see dimension l 3 /l 4 (clear area) and centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. These tools should only be used in shrink or hydro-.expansion chucks. Application: Can be used for copy milling, traverse and slot cutting. (Not with pivoted milling spindle.) The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Recommended for HSC machining up to 56 HRC . Note: Copy milling; cutting values preferred at ap = 0.1 x d 1 and ae = 0.5 x d 1 .

Z 2

Type N

Solid carbide

Factory standard

DIN 6535-HA

HSC

30°

3°

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2430

200

200

180

160

140

120

80

200

80

6WHHOV XSWR +5F fz mm

2430

dia.

Order No.

Corner radius r ± 0.01 mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Clear area l 4 mm

Shank dia. d 2 = h6 mm

d 1

= h8

mm

Signum

0200 0300 0400 0600 0800 1000 1200

2 3 4 6 8

66.20 73.20 51.40 55.80 64.50 73.20

0.5 0.5 1.0 2.0 2.0 3.0 4.0

3.0 3.5 4.0 6.0 7.0 8.0

57 57 57 57 63 72 83

1.8 2.8 3.8 5.6 7.6 9.6

6.2 8.4 9.4

20 20 20 20 25 30 35

6 6 6 6 8

0.020 0.030 0.035 0.040 0.050 0.070 0.080

– – – –

10 12

10 12

110.50

10.0

11.5

(221)

2/105

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.