Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 352

Solid Carbide 2 Flute Slot Drill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type N, according to company standard, 30°, TiAlN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for milling keyways and feather key grooves. With corner radius to avoid notching effects on the workpiece. Suitable for HSC machining up to 62 HRC .

Solid carbide UF

Type N

Z 2

Factory standard

DIN 6535-HA

HSC

30°

7°

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2428

80

52

52

52

32

32

80

32

6WHHOV XSWR +5F f z mm

6WHHOV XSWR +5F f z mm

2428

2428

dia. d 1 = e8 mm

dia. d 1 = e8 mm

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Shank dia. d 2 = h6 mm

Shank dia. d 2 = h6 mm

Overall length l 1 mm

Overall length l 1 mm

TiAlN

TiAlN

1030 1040 1042 1050 1052 1060 1062 1064 1080 1082 1084

3 4 4 5 5 6 6 6 8 8 8

34.80 34.80 34.80 34.80 34.80 34.80 34.80 34.80 44.60 44.60 44.60

0.3 0.3 0.5 0.3 0.5 0.3 0.5 1.0 0.3 0.5 1.0

12 15 15 20 20 20 20 20 25 25 25

50 50 50 60 60 60 60 60 70 70 70

6 0.003 6 0.004 6 0.004 6 0.006 6 0.006 6 0.010 6 0.010 6 0.010 8 0.014 8 0.014 8 0.014

1086 1088 1100 1102 1104 1106 1108 1202 1204 1206 1208

8 48.60 8 48.60 10 65.90 10 65.90 10 65.90 10 71.90 10 71.90 12 90.40 12 90.40 12 98.70 12 98.70

1.5 2.0 0.3 0.5 1.0 1.5 2.0 0.5 1.0 1.5 2.0

25 25 30 30 30 30 30 30 30 30 30

70 70 90 90 90 90 90 90 90 90 90

8 0.014 8 0.014 10 0.017 10 0.017 10 0.017 10 0.017 10 0.017 12 0.015 12 0.015 12 0.015 12 0.015

(212)

(212)

Solid Carbide 2 Flute Necked and Tapered Torus Cutter with Corner Radius for Hard Machining

Design: Solid carbide (K05/10), type N, DIN 6527, 30°, Signum-coated, with tapered neck – see dimension l 3 /l 4 (clear area) and centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. These tools should only be used in shrink or hydro-.expansion chucks. Application: Can be used for copy milling, traverse and slot cutting. The tool life increases with MQL or air cooling. Suitable for HSC machining up to 56 HRC . Note: Copy milling; cutting values preferred at ap = 0.1 x d 1 and ae = 0.5 x d 1 . Solid carbide 30° 8°

Type N

Z 2

DIN 6527

DIN 6535-HA

HSC

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2432

200

200

180

160

140

120

80

200

80

6WHHOV XSWR +5F f z mm

2432

dia.

Order No.

Corner radius r ± 0.01 mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Clear area l 4 mm

Shank dia. d 2 = h6 mm

d 1

= h8

mm

Signum

0200 0300 0400 0600 0800 1000 1200

2 3 4 6 8

101.00

0.5 0.5 1.0 2.0 2.0 3.0 4.0

3.0 3.5 4.0 6.0 7.0 8.0

80 80 80 80

1.8 2.8 3.8 5.6 7.6 9.6

8

40 40 40 60 75 70

6 6 6 8

0.02 0.03

88.90 61.90 92.30

12 20 25 30 30 30

0.035

0.04 0.05 0.07 0.08

119.50 140.50 235.00

100 120 160

10 12 16

10 12

10.0

11.5

100

(221)

2/106

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).