Catalog FORMAT plus - EDE 2015 - 2017

357

Milling Cutters

Solid Carbide Multi Flute Necked End Mill with Corner Radius for Hard Machining

Design: Solid carbide NANO, type H, according to company standard, 45°, TiAlN-S-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for slot cutting. Is also suitable for milling deep grooves thanks to the offset shaft. For large milling depths of up to 3 x D. With corner radius to avoid notching effects on the workpiece – less corner wear during plunge cutting and slot cutting. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Suitable for HSC machining up to 70 HRC .

Z 6

Type H

Solid carbide NANO

Factory standard

DIN 6535-HA

45°

1°

HSC

2 Cutting Tools

TiAlN-S

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2438

490

490

490

301

301

301

+DUG PDFKLQLQJ RYHU +5F fz mm

2438

dia. d 1 mm

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

TiAlN-S

0010 0020 0030 0040 0050 0060 0070 0080 0090 0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210

6 6 6 8 8 8

39.20 44.60 53.70 46.80 55.90 69.40 73.10 84.30 84.30

0.5 0.5 0.5 0.5 0.5 0.5 1.0 0.5 1.0 1.0 0.5 1.0 1.0 1.0 1.0 1.5 1.5 1.0 1.5 2.0 2.0

6

50 70 70 60 90 90 70

5.85

14

6 6 6 8 8 8

0.022 0.022 0.022 0.028 0.028 0.028 0.031 0.031 0.031 0.031 0.033 0.033 0.033 0.033 0.035 0.035 0.035 0.036 0.036 0.036 0.036

13 26

– –

– –

8

7.70

24

19 36 10 22 22 46 26 12 26 56 32 32 66 38 38 38 76

– –

– –

10 10 10 10 12 12 12 12 16 16 16 20 20 20 20

9.70

30

10 10 10 10 12 12 12 12 16 16 16 20 20 20 20

100 100 100 110 110 110 130 130 130 140 140 140 140 75

– – – – – – – – – – – – –

– – – – – – – – – – – – –

109.50 115.00

87.30

11.70

30

115.00 155.50 194.00 212.00 272.50 284.50 310.50 310.50 425.00

(212)

Solid Carbide Long Series Multi Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide (K50), type H, according to company standard, 55°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high-precision finishing. For large milling depths up to 3 x D. Ideal for use in mould-making and dip working thanks to the neck chip channel and corner radius with long range. The extremely high spiral lead and reinforced core results in particularly smooth running and thus low deviation in shape and a very good surface on the workpiece. uitable for HSC machining up to 62 HRC .

Solid carbide UF

Z 6

Type H

Factory standard

DIN 6535-HA

55°

–5°bis–10°

HSC

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2388

55

45

200

40

40

6WHHOV XSWR +5F f z mm

2388

dia.

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

d 1

= h10 mm

Signum

0600 0800 1000 1200 1600

6 8

40.90 46.20 81.90

0.5 0.5 0.5 1.0 1.0

13 19 22 26 32

75

5.7 7.7 9.5

39 64 60

6 8

0.024 0.032 0.038 0.046 0.054

100 100 150 150

10 12 16

10 12 16

114.00 204.00

11.5 15.5

105 102

(221)

2/111

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.